![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Aug 2002
Location: Central Washington
Posts: 8
|
![]() I have installed the new control valve, power ram, hoses & pump in the 67 stang. I also replaced the steeering box with a used one, but now I have 1/8 turn play in the steering (better than the 1 1/4 turn play I had before) and a pronounced "clunk" when turning the wheel before the pitmann arm moves.
Anyone have any repair ideas?
__________________
Dave |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Jul 2002
Location: Oklahoma City
Posts: 208
|
![]() You made the mistake of using a "used" steering box. Generally, one can measure the amount of play by simply moving the steering shaft and watching the pitman shaft. If the steering shaft moves but the pitman doesn't the box is worn. Some wear can be compensated by adjusting the box using shop manual procedures. There are two adjustments: bearing preload and sector clearance. The box must be out to adjust bearing preload since the adjuster is located around the steering shaft. The idea is to take the play out of the bearings then and only then to adjust the sector clearance. For most 35 year old reciprocating ball steering boxes this is a waste of time. The bearings need to be replaced and usually the sector gear needs replacing. The easiest way is to pay the $419 for a new Flaming River box for your '67. You'll be glad you did.
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Aug 2002
Location: Central Washington
Posts: 8
|
![]() Thanks Jeff65.
That will require a quite a bit more saving of $ for this poor workin' stiff.
__________________
Dave |
![]() |
![]() |
![]() |
#4 | |
Registered Member
Join Date: Jul 2002
Location: Oklahoma City
Posts: 208
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Play in steering whel. | COUSIN ROB | Modular Madness | 1 | 10-04-2004 02:29 PM |
Steering and Braking Help!!! | 67 Demon | Classic Mustangs | 8 | 07-28-2003 08:09 PM |
turn signal-maybe the whole harness-calling all electricians? | rwhite65 | Classic Mustangs | 6 | 07-25-2003 08:40 AM |
Steering wheel has excessive play | jmX | Windsor Power | 0 | 01-19-2001 10:55 PM |
Steering has too much play | jruizleon | Classic Mustangs | 11 | 10-29-2000 11:30 PM |