Shift Light NEED HELP!!!
 

I just bought a Auto Meter shift light and I don't know where to hook up the green wire. I know it would go to the Dis-4 if I had one but I don't. Where should it go to the coil packs? If so to which one? Any suggestions would be great.

Later, Will

------------------
98Cobra
off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials

Goto Autometers website http://www.autometer.com/hp/index.html

but to save some time here ya go

Ford 3.8L and 4.6L MUSTANGS ('96 - '98 only)
Tach output is obtained from PCM (powertrain control module) which is a 104 wire connector, and is located behind the passenger side kick panel. Look for pin number 48, which is usually an orange wire with a white stripe.


------------------
2000 GT Laser red-5speed,MAC Cold Air, MAC 2 1/2" Cat-Back, 3.27gears, Pro-5.0 shifter, Weld Draglite's 15x5 and 15x10, 275/50-15 DragT/A's, 165R15 front, BBK Underdrive pullies, BBK offroad X-pipe with Dynomax super converters

Best Quarter mile run to date: 13.350@101.79/1.844 60'(7-6-01)Best MPH 101.79(7-6-01)

Thanks Ares. I already had the panel off, and the wires exposed. Will the wires have the pin number on them? And also are the wires going into the computer the ones I want?

Thanks, Will

------------------
98Cobra
off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials