supercharger
 

i was wondering if someone could tell me what mods i need to have before installing a supercharger or can it just be bloted on to a stock setup?

------------------
1999 mustang GT
2.5 MAC Cat-back
K&N filter

Depends on the kit. Most of the kits come pretty complete, so you don't need much else. However, you might consider exhaust and possibly an different air-meter. My car didn't really come alive until I dropped the 3.73 gears in it.

Also, be very aware of your fuel system. The stock fuel system is anemic at best. You'll want to step up your injectors to a MINIMUM of 30# and replace your intank pump with a Walbro 255lph or equivilent. Also, the pickup in your tank has an 1/8 check-valve. Ever try to breath through a straw??? Get that fixed while you're at it.

Get the car dynoed using an air/fuel meter to be sure you're not leaning out. Have someone who knows what they're listening for check for detonation.

Good luck!

------------------
Tracy C.
<IMG SRC="http://www.equusit.com/images/YesItsFast02.gif">
Bottles are for babies... Real men get blown! http://www.mustangworks.com/msgboard/wink.gif

[This message has been edited by YesItsFast (edited 11-10-2001).]

hey thanks for the info! also i was wondering what is the max psi a stock 4.6 motor can take?

------------------
1999 mustang GT
2.5 MAC Cat-back
K&N filter