Shift Light NEED HELP!!!

98SNAKE · 08-04-2001, 07:48 PM

I just bought a Auto Meter shift light and I don't know where to hook up the green wire. I know it would go to the Dis-4 if I had one but I don't. Where should it go to the coil packs? If so to which one? Any suggestions would be great.

Later, Will

------------------
98Cobra
off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials

Ares · 08-05-2001, 03:47 PM

Goto Autometers website http://www.autometer.com/hp/index.html

but to save some time here ya go

Ford 3.8L and 4.6L MUSTANGS ('96 - '98 only)
Tach output is obtained from PCM (powertrain control module) which is a 104 wire connector, and is located behind the passenger side kick panel. Look for pin number 48, which is usually an orange wire with a white stripe.

------------------
2000 GT Laser red-5speed,MAC Cold Air, MAC 2 1/2" Cat-Back, 3.27gears, Pro-5.0 shifter, Weld Draglite's 15x5 and 15x10, 275/50-15 DragT/A's, 165R15 front, BBK Underdrive pullies, BBK offroad X-pipe with Dynomax super converters

Best Quarter mile run to date: 13.350@101.79/1.844 60'(7-6-01)Best MPH 101.79(7-6-01)

98SNAKE · 08-05-2001, 06:59 PM

Thanks Ares. I already had the panel off, and the wires exposed. Will the wires have the pin number on them? And also are the wires going into the computer the ones I want?

Thanks, Will

------------------
98Cobra
off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials

08-04-2001, 07:48 PM	#1
98SNAKE Registered Member Join Date: Apr 2001 Location: Sterling Heights,Michigan Posts: 129	Shift Light NEED HELP!!! I just bought a Auto Meter shift light and I don't know where to hook up the green wire. I know it would go to the Dis-4 if I had one but I don't. Where should it go to the coil packs? If so to which one? Any suggestions would be great. Later, Will ------------------ 98Cobra off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got my new Shift Light!	Ackbar00	Windsor Power	1	02-18-2004 08:08 PM
Tach with shift light ?	Nick	Modular Madness	5	08-05-2003 06:45 PM
Shift Light	5.0L_Of_Fury	Blue Oval Lounge	0	03-17-2002 04:52 PM
shift light installed	ed1371	Blue Oval Lounge	0	03-23-2001 02:32 PM
Autometer Shift Light in a 99 GT	RedLilPony	Modular Madness	8	02-15-2001 12:53 PM

08-05-2001, 03:47 PM	#2
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	Goto Autometers website http://www.autometer.com/hp/index.html but to save some time here ya go Ford 3.8L and 4.6L MUSTANGS ('96 - '98 only) Tach output is obtained from PCM (powertrain control module) which is a 104 wire connector, and is located behind the passenger side kick panel. Look for pin number 48, which is usually an orange wire with a white stripe. ------------------ 2000 GT Laser red-5speed,MAC Cold Air, MAC 2 1/2" Cat-Back, 3.27gears, Pro-5.0 shifter, Weld Draglite's 15x5 and 15x10, 275/50-15 DragT/A's, 165R15 front, BBK Underdrive pullies, BBK offroad X-pipe with Dynomax super converters Best Quarter mile run to date: 13.350@101.79/1.844 60'(7-6-01)Best MPH 101.79(7-6-01)

08-05-2001, 06:59 PM	#3
98SNAKE Registered Member Join Date: Apr 2001 Location: Sterling Heights,Michigan Posts: 129	Thanks Ares. I already had the panel off, and the wires exposed. Will the wires have the pin number on them? And also are the wires going into the computer the ones I want? Thanks, Will ------------------ 98Cobra off road x-pipe, flowmasters, 3.73 rear end(4.30's soon),Mac Cold Air,Ripper Shifter, Nitto Drag Radials