MustangWorks.com : Ford Forums - View Single Post - Anybody running MSD 8.5 mm superconducters?

93GTDIN · 10-26-2003, 05:27 PM

I just put these on my car to sniff out a high RPM spark blowout problem. They work great except *sometimes* I get a miss around 2000 RPM's. I did not have this problem before on my old, stock cobra wires. I was thinking maybe the stock coils dont work well with low resistance wires?
Having said that, my ?'s are:

A) Anybody running /run these wires on stock coils? Does it work, or did you have to upgrade coils?

B) Any idea what else might be causing this problem? I checked all the wires 4 times, they're snug down, so I dont think that's the issue.

Dino

10-26-2003, 05:27 PM	#1
93GTDIN Registered Member Join Date: Jan 2001 Location: Live music capital of the world, TX Posts: 324	Anybody running MSD 8.5 mm superconducters? I just put these on my car to sniff out a high RPM spark blowout problem. They work great except sometimes I get a miss around 2000 RPM's. I did not have this problem before on my old, stock cobra wires. I was thinking maybe the stock coils dont work well with low resistance wires? Having said that, my ?'s are: A) Anybody running /run these wires on stock coils? Does it work, or did you have to upgrade coils? B) Any idea what else might be causing this problem? I checked all the wires 4 times, they're snug down, so I dont think that's the issue. Dino __________________ 96 Cobra - a bit too stock. 14.0 @ 101