MustangWorks.com : Ford Forums - View Single Post

bigwhitecobra · 03-27-2006, 02:51 PM

DO NOT repeat DO NOT cut the filler neck!! All you have to do is slide it to the driver's side of the car and it will pull out. You may have to be a bit forceful with it. Also, you will have to unblot a bracket so that you get enough play in the tube itself. It takes a 7mm socket and you are on your way. Oh, don't forget to take off the screw clamp on the other line there. Hope this helps.

03-27-2006, 02:51 PM	#4
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	Re: Fuel Pump Problems DO NOT repeat DO NOT cut the filler neck!! All you have to do is slide it to the driver's side of the car and it will pull out. You may have to be a bit forceful with it. Also, you will have to unblot a bracket so that you get enough play in the tube itself. It takes a 7mm socket and you are on your way. Oh, don't forget to take off the screw clamp on the other line there. Hope this helps. __________________ 2003 GT White---STOLEN May you burn in hell whoever took it. Dumbazz didn't even get the good engine that was in the garage.