Bullet MAF and Throttle Body

SteveK · 10-15-2001, 10:37 AM

Has anyone installed these items on your car?

On otherwise stock engine, does this do anything?

BTW, it is 98 GT.

Thanks in advance for your input....

Hammer · 10-15-2001, 10:39 AM

You'll feel it pull a little harder in the high revs.... That's about it...

Save your money and get some gears and a shifter...

------------------
Adam "Hammer" Packett:
Moderator, Gulf War Veteran

GO GET 'EM BOYS!

SteveK · 10-15-2001, 01:58 PM

Thanks for the info.

I forgot that I do have 3.73 installed. I guess I never really consider that a "mod."

Man, that supercharger is starting to look real good......

Hammer · 10-15-2001, 03:02 PM

Be sure to have a nice, free flowing exhaust before going with forced induction. You'll get more out of it that way....

------------------
Adam "Hammer" Packett:
Moderator, Gulf War Veteran

GO GET 'EM BOYS!

46stang · 10-16-2001, 09:21 AM

bullit t/b only works on bullit intake, bullit intake only works on 99+ heads

if you want more hp either get a used 99+ motor/ or do a headswap/or get a blower!
Not sure on the maf thing. good luck.

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
271.3rwhp
302.3rwtq
best et 13.80

Hammer · 10-16-2001, 10:32 AM

Oops!
I didn't notice the question was on the "Bullit" throttle body... I was just thinking of some normal after-market stuff.

46Stang is right, it will only work on the bullit intake.... sorry...

------------------
Adam "Hammer" Packett:
Moderator, Gulf War Veteran

GO GET 'EM BOYS!

10-15-2001, 10:37 AM	#1
SteveK Registered Member Join Date: Apr 2001 Location: Round Lake, IL, USA Posts: 51	Bullet MAF and Throttle Body Has anyone installed these items on your car? On otherwise stock engine, does this do anything? BTW, it is 98 GT. Thanks in advance for your input....

10-15-2001, 10:39 AM	#2
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	You'll feel it pull a little harder in the high revs.... That's about it... Save your money and get some gears and a shifter... ------------------ Adam "Hammer" Packett: Moderator, Gulf War Veteran GO GET 'EM BOYS!

10-15-2001, 01:58 PM	#3
SteveK Registered Member Join Date: Apr 2001 Location: Round Lake, IL, USA Posts: 51	Thanks for the info. I forgot that I do have 3.73 installed. I guess I never really consider that a "mod." Man, that supercharger is starting to look real good......

10-15-2001, 03:02 PM	#4
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	Be sure to have a nice, free flowing exhaust before going with forced induction. You'll get more out of it that way.... ------------------ Adam "Hammer" Packett: Moderator, Gulf War Veteran GO GET 'EM BOYS!

10-16-2001, 09:21 AM	#5
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	bullit t/b only works on bullit intake, bullit intake only works on 99+ heads if you want more hp either get a used 99+ motor/ or do a headswap/or get a blower! Not sure on the maf thing. good luck. ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. 271.3rwhp 302.3rwtq best et 13.80

10-16-2001, 10:32 AM	#6
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	Oops! I didn't notice the question was on the "Bullit" throttle body... I was just thinking of some normal after-market stuff. 46Stang is right, it will only work on the bullit intake.... sorry... ------------------ Adam "Hammer" Packett: Moderator, Gulf War Veteran GO GET 'EM BOYS!