© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-16-2002, 10:17 PM | #1 |
Registered Member
Join Date: Jun 2002
Location: Western,MA
Posts: 254
|
idle problem
Hi all
just recently i added my bosch +4 plugs to my car now my car kinda skips at idle and in the 1500-2000 rpm range could this be my fuel pump or maybe a bad coil pack or wires ,i don`t remember this happening before the plug change but it could have been there i realy don`t want to put the old plugs back in to see if it does it then, it`s a pain in the arse to change the plugs on the 4.6 what are your thoughts and suggestions i checked all the hoses and connections they are all secure
__________________
Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/ |
07-16-2002, 11:05 PM | #2 |
Registered Member
Join Date: May 2002
Location: Chapel Hill, NC - USA
Posts: 188
|
have you looked at the exhaust color on a slow raise of the RPMs? see if the smell is more pungent or less so. it could be that you have a bad plug that is not always fireing, or maybe not enough juice to make it burn. cant go wrong with a new coil and spark amp.
Torinalth
__________________
When you finally shut down the car, just sit back and remember the run.... win or lose, you know it was a surge of adreneline |
07-20-2002, 05:42 PM | #3 |
13.3 @ 103
Join Date: May 2001
Location: Maryland
Posts: 253
|
I have the same problem, I also replaced my wires with FRPP's.
I did notice a stronger pull above 2000 RPM's though. I'm going to do a little research before I return them. (Platinum +4's) Let me know if you come up with anything further, email @ cliffymiracle@hotmail.com Is yours especially bad at 1200 RPM's? I'm waiting for a response from BOSCH. It's the plugs...
__________________
Equipment by: Steeda C&L COMP CAMS FRPP MSD Bassani Magnaflow MAC Last edited by Red Mustang Gt 46; 07-20-2002 at 06:34 PM.. |
07-20-2002, 09:48 PM | #4 |
Registered Member
Join Date: Jun 2002
Location: Western,MA
Posts: 254
|
sent you a e-mail forgot to say it skipped at idle and 1500-2000 rpm range
__________________
Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/ |
07-24-2002, 06:40 PM | #5 |
13.3 @ 103
Join Date: May 2001
Location: Maryland
Posts: 253
|
I replaced my BOSCH Platinum +4's with NGK TR55IX (replaced the TR55VX) and the difference was phenominal...to say the least.
In other words...DO NOT USE THE PLATINUM +4's...for some reason of which BOSCH could not explain, the plugs were not firing correctly with the amount of volts supplied by the stock EDIS coils (my explanation as well as Badyeller). Sent the BOSCH's back for a full refund....IM HAPPY NOW!! FYI, NAPA auto parts are a main supplier of NGK.
__________________
Equipment by: Steeda C&L COMP CAMS FRPP MSD Bassani Magnaflow MAC |
07-24-2002, 06:55 PM | #6 |
Registered Member
Join Date: Jun 2002
Location: Western,MA
Posts: 254
|
i returned the plugs and traded them form regular bosch platinums and the problem is fixed the car runs better now than when i bought it do noy use +4`s in your mustnag at leaast with stock coil packs
__________________
Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/ |
07-25-2002, 08:37 AM | #7 |
Registered Member
Join Date: Jan 2002
Location: Texas
Posts: 330
|
I am suprised about that... I have a 1998 GT with stock coils, and I have been running the Q4's (+4) since I got the car, I have never had a single problem with them, when I change them they are always the color they should be, I get incredile mileage on it, and I still have all the power I should be making. I used to run these same plugs in my truck, but that had a full MSD setup on it.... Anyways, I haven't seen any issues with my plugs on this car...
__________________
// 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Idle Problem | skrewhead | Modular Madness | 1 | 07-24-2004 10:04 PM |
Idle problem and jerking? | 69fastback | Windsor Power | 10 | 01-11-2003 05:58 PM |
Idle problem 88GT Speed Density | chuck88 | Windsor Power | 9 | 07-07-2002 09:16 AM |
347 Big Time Idle problem | 89FHPLX | Windsor Power | 2 | 01-15-2002 12:02 PM |
Different idle problem? | Scappoose | Windsor Power | 0 | 11-28-2001 05:16 PM |