Solid Lash Adjusters.

Mercury · 02-04-2004, 01:59 AM

I was just surfing the Fox Lake site, hoping to see that maybe the P-51 will be out earlier...Nope...when I noticed the Solid Lash Adjusters.

They claim 30 horsepower (Now, I know the whole spill about what manufactuers claim...and reality) is it even still reasonable to think half that could be gained on a build up like mine?

More power is always better.

Even when you cant put it to the ground till 3rd gear. right...???

91LX2Bfast · 02-04-2004, 08:13 AM

It was a local speed that actually started playing with these things, and I think several other places jumped on the wagon and grabbed the idea.
Second Street Speed: Modular Rock & Roll
Fox Lake figured out a way to makea simpler and cheaper design. The only downside with those on street vehicle I have heard of is the need to adjust much more often. Like to the tune of every 3000-5000 miles. Again, thats something I heard through some racers, so I don't know how true it is.

02-04-2004, 01:59 AM	#1
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	Solid Lash Adjusters. I was just surfing the Fox Lake site, hoping to see that maybe the P-51 will be out earlier...Nope...when I noticed the Solid Lash Adjusters. They claim 30 horsepower (Now, I know the whole spill about what manufactuers claim...and reality) is it even still reasonable to think half that could be gained on a build up like mine? More power is always better. Even when you cant put it to the ground till 3rd gear. right...??? __________________ 64 1/2 "D" code Red Mustang Coupe. Red Baron, 2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars. Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.

02-04-2004, 08:13 AM	#2
91LX2Bfast Registered Member Join Date: Dec 1999 Location: Warrington, PA Posts: 694	It was a local speed that actually started playing with these things, and I think several other places jumped on the wagon and grabbed the idea. Second Street Speed: Modular Rock & Roll Fox Lake figured out a way to makea simpler and cheaper design. The only downside with those on street vehicle I have heard of is the need to adjust much more often. Like to the tune of every 3000-5000 miles. Again, thats something I heard through some racers, so I don't know how true it is. __________________ '97 T-bird LX 4.6L 2V, auto SVO heads/intake, Vortech T-trim, front mounted intercooler, blower cams, Cobra crank, Manley H-beam rods, JE pistons, Aeromotive fuel system w/ 42# injectors, and much more No times yet

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rocker arm and lash adjuster ? Hammer you out there?	surfbeast	Modular Madness	0	04-22-2004 06:58 PM
Should you run a solid lift cam with stock bottom	ciara	Windsor Power	1	10-23-2003 11:12 AM
Solid Roller ?	STROKER BILLY	Windsor Power	5	11-19-2002 12:04 AM
Solid Motor Mounts	gtsr515	Windsor Power	8	04-19-2002 08:10 AM
hydraulic cam using solid lifters	jwboner	Windsor Power	1	06-19-2001 04:57 PM