MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-18-2004, 11:02 PM   #1
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

I need to get the IAC cleaned soon. I picked up some cleaner today as the car actually died on me one time today slowing for a light. The rpms will drop real low at times at idle and apparently low enough to stall.

Just to be sure, the IAC is bolted to my upper plenum correct? There are two bolts. It looks like a small flying saucer. There is a very small tube on top that pulls right off. Can I squirt the cleaner in the top when the tube is removed? or do I need to remove the entire IAC? If so, where to I inject the cleaner?

There is a larger tube connected in the back. I assume this is the exhaust line return the exhaust to the plenum when it is needed. I assume that the car is gulping for air because the "plunger" in the IAC is not being allowed to open completely.

Can I screw this up in any way?

Thanks!
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How big are the stock tail pipes and how restrictive are they? 96_4.6 Modular Madness 4 12-09-2003 07:41 PM
99GT vs. 2000 Lightning wantapony2001 Stang Stories 52 01-04-2003 06:30 PM
Will 99+stang tail pipes fit 96-98?? 96_4.6 Modular Madness 3 09-19-2002 05:50 PM
Paint on tail pipes... MustangKelly96 Appearance & Detailing 2 08-23-2002 06:35 AM
are mac's 3 1/2 inch tail pipes for my setup Chevysucks Windsor Power 1 03-18-2002 03:46 PM


All times are GMT -5. The time now is 01:35 PM.


SEARCH