Steeda Tri-Ax Update

Narshadda · 03-31-2006, 12:55 AM

Hey all,

I just finished putting in the TriAx. Man what a difference!
I am so happy with it.
It takes a bit more muscle to get the gears in but I love how solid it feels. And the shift sounds are to die for!

Thanks to everyone for the advice!

Next on the list: Exhaust, H-Pipe, Gears... Stay Tuned!

-Narsh

1989GT · 03-31-2006, 05:34 PM

Short throw shifter is one of the best mods for driving IMO, nothing like crisp, clean shifts.

Narshadda · 04-09-2006, 08:26 PM

Yep, the only thing that sucks is that I can hear every little noise that the tranny makes.. It makes me nervous to hear all the little crunches and clicks..
Still, it is well worth it!

Red Mustang Gt 46 · 04-23-2006, 05:17 AM

I saw your other post about the noise...it helps a tad but placing a thin 2-3 mm piece of rubber between the shifter and handle will dampen some of the noise. The handle acts as a "tuning fork". Make sure you adjust the stops correctly by placing a folded piece of paper (or feeler guage) between the bolt and handle. After a month or so, re-torque the whole set-up...JUST A SUGGESTION.

Anyhow, ain't it fun jamming it in second? Congratulations...

03-31-2006, 12:55 AM	#1
Narshadda Registered Member Join Date: Feb 2006 Posts: 50	Steeda Tri-Ax Update Hey all, I just finished putting in the TriAx. Man what a difference! I am so happy with it. It takes a bit more muscle to get the gears in but I love how solid it feels. And the shift sounds are to die for! Thanks to everyone for the advice! Next on the list: Exhaust, H-Pipe, Gears... Stay Tuned! -Narsh

03-31-2006, 05:34 PM	#2
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Re: Steeda Tri-Ax Update Short throw shifter is one of the best mods for driving IMO, nothing like crisp, clean shifts. __________________ 89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. Sold 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page

04-09-2006, 08:26 PM	#3
Narshadda Registered Member Join Date: Feb 2006 Posts: 50	Re: Steeda Tri-Ax Update Yep, the only thing that sucks is that I can hear every little noise that the tranny makes.. It makes me nervous to hear all the little crunches and clicks.. Still, it is well worth it!

04-23-2006, 05:17 AM	#4
Red Mustang Gt 46 13.3 @ 103 Join Date: May 2001 Location: Maryland Posts: 253	Re: Steeda Tri-Ax Update I saw your other post about the noise...it helps a tad but placing a thin 2-3 mm piece of rubber between the shifter and handle will dampen some of the noise. The handle acts as a "tuning fork". Make sure you adjust the stops correctly by placing a folded piece of paper (or feeler guage) between the bolt and handle. After a month or so, re-torque the whole set-up...JUST A SUGGESTION. Anyhow, ain't it fun jamming it in second? Congratulations... __________________ Equipment by: Steeda C&L COMP CAMS FRPP MSD Bassani Magnaflow MAC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2001 Gt (steeda) Hood Update.	steedamustang01	Modular Madness	4	04-30-2002 06:16 PM
steeda 18 cam help need more info	FordFasteR	Windsor Power	4	03-28-2002 01:10 PM
AAAARGH! Steeda timing adjuster causing computer problems!!!	bark3rd	Modular Madness	1	06-04-2001 08:15 PM
Just bought the Steeda Tri-ax Shifter	swtstang	Windsor Power	2	05-24-2001 02:47 AM
real steeda	batm351	Special Production	4	07-09-2000 10:49 PM