fastest 4.6 with just bolt ons

faststang90 · 02-25-2002, 02:36 PM

i have a friend with a 02 gt it has a gear, a cold air kit long tubes and exhaust i think he has a chip too ( but not sure ) his car is running a 12.74 @ 106 has any 1 gone faster with just bolt ons
im thinking about getting a new 1 has any 1 ported heads and do they make cams for these 4.6s

Mustang92 · 02-25-2002, 02:56 PM

I've heard of one guy running 12.6 @ 108 NA with a stock long block but honestly I don't know how much truth there is to that. Otherwise I would say most are in the 12.8 to 12.9 range with bolt-ons and some with ported heads, cams, etc... My best is with just bolt-ons and prior to the intake, now the car with the intake a tune should be a little quicker. Of course it would be nice to run in some decent air for once. My times usually correct to 12.6 to 12.7 @ 105.

Bill

StoplightWarrior · 02-25-2002, 03:46 PM

Yeah, Bill's pretty fast, but I've gotta be the quickest. Check my sig:

Mercury · 02-26-2002, 03:59 AM

Thats a good one StopLight Warrior.

I like the seat belt fluid..How much power did that one add?

SLOW 97 · 02-26-2002, 09:49 AM

If you change your muffler bearings and add some stickers you'll maybe hit low 11's!!!

Snakeman · 02-26-2002, 01:25 PM

there's that bubble bursting...

would you believe 10.45 @ 131 mph?
see the article in the 1/02 5.0 magazine entitled urban legend

StoplightWarrior · 02-26-2002, 02:34 PM

Quote:

Originally posted by Mercury
Thats a good one StopLight Warrior.

I like the seat belt fluid..How much power did that one add?

With just the spoiler and seatbelt fluid I dropped 9 tenths off my ET. This weekend I'm putting some Headlight Knob and power seat fluid in, then I'll update my sig.

98SteedaGT · 03-08-2002, 03:46 PM

Did you know if you put a flowmaster sticker on your side windows you get 100+ HP from it, and if you put one on the other side, you can get your car into the 9's. No kiding. I read an article on the web about it, so you know it must be true... hehe

Also, I like the idea about the seatbelt lube. what kind of oil was that again???wasn't made from bull droppings was it?

StoplightWarrior · 03-08-2002, 03:53 PM

Quote:

Originally posted by 98SteedaGT

Also, I like the idea about the seatbelt lube. what kind of oil was that again???wasn't made from bull droppings was it?

No, it's actually a mixture of Water, Dial soap, and KY Jelly. Works wonders.

NOSstang08690 · 03-13-2002, 12:43 AM

The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster

Mercury · 03-13-2002, 01:53 AM

I'm not sure if Nitrouis is considered a Bolt on. I think that falls under the category Power Adder, like Super Charger, and Turbo.

Mustang92 · 03-13-2002, 08:40 AM

Quote:

Originally posted by NOSstang08690
The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster

Nitrous is a power adder not a bolt-on were talking all motor here. Leo Sturm has gone 11.9 @ 117 with his 98 GT with a 2000 motor, bolt-ons and nitrous as well.

Bill

95mustanggt · 03-13-2002, 10:25 AM

Quote:

Originally posted by StoplightWarrior
Yeah, Bill's pretty fast, but I've gotta be the quickest. Check my sig:

That is pretty quick but I know a guy who ran 12.3@109 in reverse!

But he filled his car with helium to make it lighter.

StoplightWarrior · 03-13-2002, 03:18 PM

Quote:

Originally posted by 95mustanggt

That is pretty quick but I know a guy who ran 12.3@109 in reverse!

But he filled his car with helium to make it lighter.

Of course, Helium, how'd we miss that!!

cuttincircles · 08-24-2008, 03:50 AM

Quote:

Originally Posted by NOSstang08690

The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster

I have a '96 with an '02 engine, longtubes, K&N CAI, runs 12.24-28 consistently with the best a 12.22@109

02-25-2002, 02:36 PM	#1
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	fastest 4.6 with just bolt ons i have a friend with a 02 gt it has a gear, a cold air kit long tubes and exhaust i think he has a chip too ( but not sure ) his car is running a 12.74 @ 106 has any 1 gone faster with just bolt ons im thinking about getting a new 1 has any 1 ported heads and do they make cams for these 4.6s

02-25-2002, 02:56 PM	#2
Mustang92 Drag Racer! Join Date: Nov 1999 Location: Lake Worth, FL USA Posts: 757	I've heard of one guy running 12.6 @ 108 NA with a stock long block but honestly I don't know how much truth there is to that. Otherwise I would say most are in the 12.8 to 12.9 range with bolt-ons and some with ported heads, cams, etc... My best is with just bolt-ons and prior to the intake, now the car with the intake a tune should be a little quicker. Of course it would be nice to run in some decent air for once. My times usually correct to 12.6 to 12.7 @ 105. Bill __________________ 2000 GT VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune. 285 RWHP/296 RWTQ 11.97 @ 113.20 M/M 100, 7085 www.uprproducts.com www.ponyexpressperformance.com www.modulardepot.com

02-25-2002, 03:46 PM	#3
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	Yeah, Bill's pretty fast, but I've gotta be the quickest. Check my sig: __________________ Black 2000 GT Auto V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc... 341rwhp, 338 torque 1994 Cobra #4343 Bolt on's only... Cofounder of Raccoon Racing

02-26-2002, 03:59 AM	#4
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	Thats a good one StopLight Warrior. I like the seat belt fluid..How much power did that one add? __________________ 64 1/2 "D" code Red Mustang Coupe. Red Baron, 2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars. Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.

02-26-2002, 09:49 AM	#5
SLOW 97 Registered Member Join Date: Feb 2002 Location: Arlington Heights,IL Posts: 231	If you change your muffler bearings and add some stickers you'll maybe hit low 11's!!! __________________ '97 Laser Red GT Coupe Stock 2V (Pulled Silencer) 4R70W Automatic Ripped off a BLISTERING 15.37@90MPH With a 2.21 60ft Just Installed- K&N Air Filter Coming Soon...... -4.10's -Flowmaster A/T or Magnapack Cat-Back

02-26-2002, 01:25 PM	#6
Snakeman Registered Member Join Date: Apr 1999 Location: Grass Valley, CA, USA Posts: 1,389	*POP* there's that bubble bursting... would you believe 10.45 @ 131 mph? see the article in the 1/02 5.0 magazine entitled urban legend __________________ LX ~vs~ Camaro

03-08-2002, 03:46 PM	#8
98SteedaGT Registered Member Join Date: Jan 2002 Location: Texas Posts: 330	Better Power Upper.... Did you know if you put a flowmaster sticker on your side windows you get 100+ HP from it, and if you put one on the other side, you can get your car into the 9's. No kiding. I read an article on the web about it, so you know it must be true... hehe Also, I like the idea about the seatbelt lube. what kind of oil was that again???wasn't made from bull droppings was it?

03-13-2002, 12:43 AM	#10
NOSstang08690 Registered Member Join Date: Mar 2002 Location: Hamilton, NJ Posts: 46	The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs 12.4 at 108 mph have not found a modular GT with just boltons that is faster

03-13-2002, 01:53 AM	#11
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	I'm not sure if Nitrouis is considered a Bolt on. I think that falls under the category Power Adder, like Super Charger, and Turbo. __________________ 64 1/2 "D" code Red Mustang Coupe. Red Baron, 2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars. Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem, Bolt Removal	KrivoK	Classic Mustangs	2	12-19-2003 07:26 AM
Ideas on removing a stubborn bolt?	Evil Joe	Windsor Power	6	07-02-2003 07:59 PM
Control Arm bolt from hell	PeTr0	Windsor Power	4	03-21-2003 03:04 AM
Broke bolt in new head (Kinda Long)	1988GTCONERTIBLE	Windsor Power	6	05-12-2002 02:00 PM
Bolt problem	DaTank	Windsor Power	1	08-27-2001 03:28 PM