© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-26-2001, 12:12 PM | #1 |
Registered Member
Join Date: Jan 2001
Location: gaithersburg md, 20879 usa
Posts: 120
|
STEEDA
Hi guys, I work in a technical college where they teach mechanic, well I became friend with the professor that teaches suspension and he told me that he could replace the suspension in my car (I had an accident that cost the insurance $9000). I decided to buy from Steeda the “G-Track suspension kit stage 1 and stage 2, well the mechanic students are doing the work and most of it is finish, man does the car ever look cool. The 2 kits cost $1300.
Any of you guys have installed any of these kits? the sway bar, strut and shocks are adjustable but I don’t know which will be the best adjustment for “aggressive city driving”. |
02-26-2001, 07:25 PM | #2 |
Registered Member
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
|
Yeah, I used to have the Steeda GTrac III.
But basically what you want to do is this: Start with the shocks and struts on full soft. Drive around and see how the car takes bumps. Don't get too crazy yet. You just want to see how the car takes bumps. Set the shocks and struts up a notch and repeat. Keep doing this till the springs are fulling damped. IE, when you hit a bump the shock ubsorber takes the bump, but does not bounce afterwards. Also, you will most likely end up with different settings on the front and back. I ran 4 on the front and 3 on the rear. The sway bar is more difficult because you need to toss the car pretty close its limits in order to see how it handles. Other then a track, a big empty parking lot will probably be the safest place to do this. Like with the shocks and struts, start with it set to the lowest (IE, the end links the longest). Then you want to do basically a skid pad test. Drive the car in a fairly tight circle, (about 200 ft if possible). Gradually speed up until the car starts to lose traction. Hopefully with the sway bar at full soft the car will understeer. Stiffen the sway bar a bit, and try again. Note that car will handle a bit differently depending on which way you go around the circle. Repeat until the car handles almost neutrally going both ways. I would advise leaving a bit of understeer as a safety margin. That should get you pretty close. Finally drive it on the road and see how it feels. Adjust as needed. |
02-27-2001, 08:01 AM | #3 |
Registered Member
Join Date: Jan 2001
Location: gaithersburg md, 20879 usa
Posts: 120
|
"Snake" I really appreciate the advice, I will try doing what you told me this weekend. I will keep you posted, thanks again.
............................. Steeda Under drive pullyes, 3:73, Michellin "pilot" XGT. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Autozone, Steeda smarter than Ford | GodStang | Windsor Power | 3 | 09-02-2002 10:45 PM |
steeda 18 cam help need more info | FordFasteR | Windsor Power | 4 | 03-28-2002 01:10 PM |
AAAARGH! Steeda timing adjuster causing computer problems!!! | bark3rd | Modular Madness | 1 | 06-04-2001 08:15 PM |
Just bought the Steeda Tri-ax Shifter | swtstang | Windsor Power | 2 | 05-24-2001 02:47 AM |
real steeda | batm351 | Special Production | 4 | 07-09-2000 10:49 PM |