$2000 for 5 rwhp

97whitecobra · 08-20-2002, 03:17 PM

I have a 97 cobra with the usual bolt ons. Recently added fully ported stock intakes and the imrc deletes. This was supposed to get me about 30 to 40 horse gains after 4500 rpms and 20hp at the peak. I lost low end torque and 5 to 10 low end horses. Only gain was from 6200 rpms to 7200 where i gain from 4 to 20hp. Car went 2 tenths slower. It was a hotter day by 20 degrees, but still. what mods does it take naturally aspirated to get 305 hp at the rear wheels? and what about shortys? Thanks.

Dark_5.0 · 08-20-2002, 04:07 PM

Long tube headers
X-pipe
timing adjuster
underdrive pulley's etc...

You should be able to get there with just bolt ons.

91LX2Bfast · 08-20-2002, 08:27 PM

I also think you should hit 305 rwhp with just bolt on's.
MAF
Power pipe
X-pipe
U/D Pulleys
chip or timing adjuster.

Hammer · 08-20-2002, 08:41 PM

What gear ratio are you running?

97whitecobra · 08-20-2002, 09:43 PM

4:10 gear

08-20-2002, 03:17 PM	#1
97whitecobra Registered Member Join Date: Aug 2002 Location: Livonia, MI Posts: 8	$2000 for 5 rwhp I have a 97 cobra with the usual bolt ons. Recently added fully ported stock intakes and the imrc deletes. This was supposed to get me about 30 to 40 horse gains after 4500 rpms and 20hp at the peak. I lost low end torque and 5 to 10 low end horses. Only gain was from 6200 rpms to 7200 where i gain from 4 to 20hp. Car went 2 tenths slower. It was a hotter day by 20 degrees, but still. what mods does it take naturally aspirated to get 305 hp at the rear wheels? and what about shortys? Thanks.

08-20-2002, 04:07 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Long tube headers X-pipe timing adjuster underdrive pulley's etc... You should be able to get there with just bolt ons. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

08-20-2002, 08:41 PM	#4
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	What gear ratio are you running? __________________ Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...."

08-20-2002, 09:43 PM	#5
97whitecobra Registered Member Join Date: Aug 2002 Location: Livonia, MI Posts: 8	4:10 gear __________________ 97 cobra: pullys, full bassani X w/cats 4:10, steeda tri-ax, mac cold air, ported intakes, imrc deletes, tuned chip 291 rwhp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno'd my Stock '03 Cobra - 386 RWHP	NO SLO PK	Modular Madness	9	05-05-2003 08:54 PM
New 5.0 coming - Est. RWHP	B2r3y	Windsor Power	13	02-26-2003 05:10 PM
03 Cobra makes 400 rwhp and runs 11's!!	Stang_Crazy	Blue Oval Lounge	15	07-15-2002 08:42 AM
Stock RWHP on 94 GT?	Whoapony94	Windsor Power	11	04-08-2002 03:15 PM
Is 209 rwhp Ok for my mods?	GTLee	Windsor Power	14	08-13-2001 10:25 AM

08-20-2002, 08:27 PM	#3
91LX2Bfast Registered Member Join Date: Dec 1999 Location: Warrington, PA Posts: 694	I also think you should hit 305 rwhp with just bolt on's. MAF Power pipe X-pipe U/D Pulleys chip or timing adjuster.