© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-22-2001, 05:04 PM | #1 |
Registered Member
Join Date: May 2001
Posts: 3
|
So Where Do I Start!?!?!
Hey guys!!!!
So I Just got a 2000 new/used Mustang GT. It was the demo car for this dealership near me...So summer's here and im trying to hook this up for racing and looks and i was wondering where to start...What mods do i need first? Peace 2000 GT, Bone Stock, just a couple of music CD's..... |
05-22-2001, 06:32 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: Sterling Heights,Michigan
Posts: 129
|
Well the first couple of mods I would do are these.
1.3.73 or 4.10 rear end gear 2.x or h pipe with or without cats depending on where you live 3.BBK, MAC, or some type of cold air kit with a K&N air filter 4.Set of Steeda underdrive pulleys 5.Also a short throw shifter would'nt hurt 6.And a Steeda timing adjuster is also a good buy i've been told. That is a basic bolt on list, start with what you can afford. If I where you the gears would go in first. Well have fun and happy moding. Will ------------------ 98Cobra off road x-pipe, flowmasters, 3.73 rear end, Ripper Shifter, Nitto Drag Radials |
05-22-2001, 06:37 PM | #3 |
Drag Racer!
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
|
I'd agree with everything that 98SNAKE said except for the cold air kit. From what I've seen at the track and on the dyno they give no additional power. Stick with a drop in K&N or if you want to spend the money pick up a C&L Kit.
------------------ 00 GT, MAC Offroad H, Steeda Pulleys & Timing Adjuster, 4.10’s, Flows w/turndowns, UPR shifter, UPR Pro Series LCA’s, Lakewood 70/30’s & 50/50’s, Weld Pro Stars, Kaenen Cobra R Hood, 253.8 RWHP/292.8RWTQ 12.91@101.93 (1.74 60ft) M/M 100, 7085 Recent Pic from Moroso |
05-24-2001, 11:48 AM | #4 |
Registered Member
Join Date: Mar 2001
Location: AUSTIN, TX, USA
Posts: 91
|
I agree with Mustang 92 about just dropping in a K&N without the cold air kit. I put a filter into the stock intake and was amazed at the difference! I have never had such a noticeable difference with just a filter with any other car I have owned. It revs out much cleaner and pulls a little harder, I had bogs in a few spots especially in 1st and 4th that are now gone. Bought it at Pep Boys for $45.00 and the Pep Boy slapped it in for me! After all the articles and dyno tests about the cold air intake, I'm going to skip it until I am flowing way more air (supercharger).
------------------ Black 2000 GT,5 spd,17" wheels,4:10's,flowmasters have parts: steeda underdrives,steeda timing adjuster |
05-24-2001, 01:07 PM | #5 |
Registered Member
Join Date: May 2001
Location: Carrollton,Tx
Posts: 2
|
ya, he preaty much covered everything, I would also definitly get some springs, got to loose the offroad look.
------------------ DarkPony's Page 98 Black GT, 5 speed, Black Leather, 96 cobra wheels, bassani x/cats, Mac Pro-Dumps, Steeda Timing adj. 16deg., ASP Balanced Pullies, Eibach Sprotlines, K%N, Accell Coil Packs, Crane 8.5mm Fire Wires, FRPP 70MM Throttle Body, Pro-5.0, Autometer Shiftlite, 35th Aniv. Dash Bezel, Painted trim accents 221RWHP 1/8th 296RWTQ |
05-24-2001, 01:09 PM | #6 |
The Redneck James Bond
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
|
This reminds me of something I posted on a string about someones car bogging bad, and occasionally stalling. I told them to reset the computer and drive it like they stole it.
I forgot to say, dont put the gas more than 3/4's the way down. After 3/4's throttle the computer goes out of adaptive memory mode. Be either on the 3/4 throttle or off of it. Also let the car idle alot, for about 15 minutes. And the car will probably stall on you once of twice before it learns how to idle again. I'm sorry about leaving those last parts out last time, I wasnt thinking fully. ------------------ 64 1/2 "D" code Red Mustang Coupe. 289, C4, 3:1 rear gear. Mallory duel point. Ported & Polished 65 heads shaved .01 with 351 windsor valves, 11:1 comp, 1.7:1 sled rockers, blue wolverine lumpy cam, modified autolite 4100 Hipo 4 barrel. And to many others to list 2000 Perf Red Mustang GT. 5spd. BBK Underdrive pulleys, Flotech off-road H pipe. Hurst T-Handle 64 1/2 red 6cyl coupe. Auto. project car. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wont Start, help! 1995 GT 5.0 | Year2001Boogie | Windsor Power | 13 | 05-05-2004 09:26 PM |
Wont Start, Dies, Help ! 1995 GT-5.0 | Year2001Boogie | Modular Madness | 8 | 04-29-2004 02:12 PM |
sometimes car turns over a lot but doesn't start | MineralGray02K | Modular Madness | 3 | 09-16-2002 10:41 PM |
car wont start!! | 50bird | Windsor Power | 1 | 08-09-2001 05:53 PM |
HELP- CAR WONT START | jimdrechsler | Windsor Power | 12 | 06-29-2001 08:44 PM |