control arms do help!!!

slow98 · 08-24-2003, 09:08 PM

i finally went to the track.....i went from 2.2 60' times to consisant 1.9s on street tires....well worth the money!!!!

96_4.6 · 08-24-2003, 11:52 PM

Good, what kind did you get and how much did you pay??

slow98 · 08-25-2003, 12:15 AM

steeda aluminum lowers with the drag bushings which were $206 and the steeda heavy duty uppers which were 92$ they were cheaper because i got them from cr motorsports and shipping was free....both were easy to install

ac97gt · 08-25-2003, 04:12 PM

what exactly do these do? do you have to weld them on? any improvement on stock?

95mustanggt · 08-25-2003, 05:00 PM

Quote:

Originally posted by ac97gt
what exactly do these do? do you have to weld them on?

They help put the power to the ground. They bolt in place of the stock units.

Quote:

Originally posted by ac97gt
any improvement on stock?

He went from consistent 2.2 60' times to 1.9, that's a decent improvement.

slow98 · 08-25-2003, 11:06 PM

that was with 35 psi in the tires and i did not remove the front sway bar

08-24-2003, 09:08 PM	#1
slow98 Registered Member Join Date: Apr 2001 Location: draper,va,us Posts: 206	control arms do help!!! i finally went to the track.....i went from 2.2 60' times to consisant 1.9s on street tires....well worth the money!!!! __________________ 1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock

08-24-2003, 11:52 PM	#2
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Good, what kind did you get and how much did you pay?? __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

08-25-2003, 12:15 AM	#3
slow98 Registered Member Join Date: Apr 2001 Location: draper,va,us Posts: 206	steeda aluminum lowers with the drag bushings which were $206 and the steeda heavy duty uppers which were 92$ they were cheaper because i got them from cr motorsports and shipping was free....both were easy to install __________________ 1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock

08-25-2003, 04:12 PM	#4
ac97gt Registered Member Join Date: May 2003 Location: Virginia (DC) Posts: 232	what exactly do these do? do you have to weld them on? any improvement on stock? __________________ 1997 Mustang GT "Pacific Green" Flowmasters Bassani X w/cats Steeda Triax K&N and Air Intake Silencer Removed More to come with money! My Ride

08-25-2003, 11:06 PM	#6
slow98 Registered Member Join Date: Apr 2001 Location: draper,va,us Posts: 206	that was with 35 psi in the tires and i did not remove the front sway bar __________________ 1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What brand Control arms are good for 94GT	NYC1	Windsor Power	7	11-14-2002 07:39 PM
granatelli lower control arms are junk!	sn95gt19	Windsor Power	9	07-02-2002 09:37 AM
Control Arms	RoadWarrior	Windsor Power	1	04-13-2002 02:29 AM
control arms	waldoo28	Modular Madness	2	01-24-2001 02:15 PM
Rear upper control arms	red82gt	Corner Carvers Delight	2	08-01-2000 11:10 AM