bullitt intake

01 BLACK GT · 09-03-2001, 10:48 PM

Where can I buy one. I want the setup badly!

------------------
01' Black GT 2 chamber Flows,bassanni x-pipe with cats,BBK Cold Air,Steeda pullies and timing adjuster@13*,Tri-ax shifter,A pillar Double gauge pod,Auto meter White Phantom Gauges,Richmond 3:73's Steeda Subframe Connectors.Strut Tower Brace
13.2 103mph.Cobra R front bumper!http://www.mustangworks.com/cgi-bin/moi-media.cgi?1853+2[/url]
[url]

87horsepower · 09-04-2001, 04:19 AM

Pricing has gone up on these things. You might want to reconsider. A guy over on the Corral picked up 6hp with one and cost him almost a 1000 bucks by the time he got everything he needed to install it. However he did pick up 21hp with longtubes and an x pipe after he did the Bullitt intake. Whether he would have picked up 21 hp without it....

SouthernStang · 09-05-2001, 11:28 PM

I own a Bullitt and heard (thought) it's just a Ford racing intake

------------------
2001 Bullitt
Stock and Awesome
68 Mustang too!!

46stang · 09-06-2001, 09:08 AM

you can get it at any ford dealer, but ford is raping everyone for the upper intake elbow, was $50 now $400. the big bottom piece only costs $300, so look for it to cost around $1000 for everything. it is very similar to an svo intake but by far not identical. fyi. they look sweet as hell, i know because i have one on my ride!!
http://communities.msn.com/leonstang...oto&PhotoID=12

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
best et 13.80
best mph 103.3
bfg street tires,bakersfield, ca

[This message has been edited by 46stang (edited 09-06-2001).]

09-03-2001, 10:48 PM	#1
01 BLACK GT Registered Member Join Date: Apr 2001 Location: Baltimore, Md Posts: 35	bullitt intake Where can I buy one. I want the setup badly! ------------------ 01' Black GT 2 chamber Flows,bassanni x-pipe with cats,BBK Cold Air,Steeda pullies and timing adjuster@13*,Tri-ax shifter,A pillar Double gauge pod,Auto meter White Phantom Gauges,Richmond 3:73's Steeda Subframe Connectors.Strut Tower Brace 13.2 103mph.Cobra R front bumper!http://www.mustangworks.com/cgi-bin/moi-media.cgi?1853+2[/url] [url]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Intake with NITROUS!!!????	NOSstang08690	Power Adders	9	09-09-2003 07:05 AM
intake	ghostfacedriver	Blue Oval Lounge	1	08-26-2003 07:16 AM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Bullitt intake with blower	blue00gt	Modular Madness	4	12-19-2001 12:33 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

09-04-2001, 04:19 AM	#2
87horsepower Registered Member Join Date: Aug 1999 Location: Florida Posts: 365	Pricing has gone up on these things. You might want to reconsider. A guy over on the Corral picked up 6hp with one and cost him almost a 1000 bucks by the time he got everything he needed to install it. However he did pick up 21hp with longtubes and an x pipe after he did the Bullitt intake. Whether he would have picked up 21 hp without it....

09-05-2001, 11:28 PM	#3
SouthernStang Mustang Girl Join Date: Aug 2001 Location: Dora,Alabama Posts: 9	I own a Bullitt and heard (thought) it's just a Ford racing intake ------------------ 2001 Bullitt Stock and Awesome 68 Mustang too!!

09-06-2001, 09:08 AM	#4
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	you can get it at any ford dealer, but ford is raping everyone for the upper intake elbow, was $50 now $400. the big bottom piece only costs $300, so look for it to cost around $1000 for everything. it is very similar to an svo intake but by far not identical. fyi. they look sweet as hell, i know because i have one on my ride!! http://communities.msn.com/leonstang...oto&PhotoID=12 ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. best et 13.80 best mph 103.3 bfg street tires,bakersfield, ca [This message has been edited by 46stang (edited 09-06-2001).]