© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-24-2001, 04:11 PM | #1 |
Registered Member
Join Date: Aug 2001
Location: Newark, DE - The First State
Posts: 15
|
$2000 for 99 Cobra
Hello All Stang's Owners,
I'm a NEWBIE and I have 2 Grant to spend on my 99 Cobra performance mods. What do you recommend to do first at 2 Grant? My target on my Cobra is Mid 11s for a quarter mile in the future, therefore I don't wanna waste money on mods (parts) that won't use to reach the target later on. Simply The Best Bang for the Bucks. Any input...appreciatte it Plus, I need some information about the Special Performance Shop for doing the right job on The Mustang near my area (Newark, DE). I'm willing to travel within 100 miles. Thank you all in advance. Eddy ------------------ 99 SVT Mustang COBRA #2085 of 4040 Electric Green Need Help for Mods [This message has been edited by SVT99COBRA (edited 08-24-2001).] |
08-24-2001, 04:18 PM | #2 |
Drag Racer!
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
|
Then you should go over to the Corral and ask for Ron99Cobra. He's running high 11's NA.
Something you may want to specify is if you want to run those times NA or with a power adder and if a power adder which one. Bill ------------------ 00 GT, MAC Offroad H, Steeda Pulleys & Timing Adjuster, C&L 80mm, 4.30’s, Flows w/turndowns, UPR shifter, UPR Pro Series LCA’s, Lakewood 70/30’s & 50/50’s, 253.8 RWHP/292.8RWTQ Best ET 12.91 Best MPH 105.49 M/M 100, 7085 2001 Mod Motor Shootout 2V NA Champion |
08-24-2001, 04:28 PM | #3 |
Registered Member
Join Date: Aug 2001
Location: Newark, DE - The First State
Posts: 15
|
Do I really need that power adder to get mid 11s? ------------------ 99 SVT Mustang COBRA #2085 of 4040 Electric Green Need Help for Mods [This message has been edited by SVT99COBRA (edited 08-25-2001).] |
08-24-2001, 04:50 PM | #4 |
Registered Member
Join Date: Aug 2001
Location: Madison, MS
Posts: 52
|
The first thing I would get would be either a 4:10 to 4:56 gear. A gear set should be about $500 installed. Then I would get exhaust. Most likely a Bassani x-pipe and some sort of cat-back system. The x-pipe I think is around $450 and the cat-back will probably be about $350-450 depending on what kind you get. Of course you will need slicks or drag radials to use all the power. I would also recommend pulleys, a K&N and maybe some sort of chip like a Superchip. This should get you well into the 12's but I don't think it would be enough to get into the 11's. If you go with a power adder the only one that would fit into your budget would be nitrous. Personally, I'm not a big fan of it because if you don't tune the car right...bye-bye motor. However, with a nitrous kit I know you would be well into the 11's. For a 4.6l, I think they run around $500 and up.
Just my $.02 One other thing, has your car had the recall "fix" for the engine? 96 Cobra 4:10 gears BBK off road h-pipe Flowmasters K&N Underdrive pulleys front and rear polyurethane bushings FMS springs Steeda CAS/CAM plates |
08-24-2001, 05:37 PM | #5 |
Guest
Posts: n/a
|
hey cvenom 96 what recall i have a 2000 gt is it involved also or just cobras my car has 10, 000 miles & i noticed lately it isnt as fast as it was or i am just getting used to it
------------------ |
08-24-2001, 06:16 PM | #6 |
Registered Member
Join Date: Aug 2001
Location: Madison, MS
Posts: 52
|
Don't worry Marty, it was only the 99 Cobra's. Turns out they got the wrong exhaust and had screwed up intakes from the factory. All 99 cobra's were recalled and the "fix" consisted of a new exhaust and the intakes were extrude honed. Supposedly there was excess casting material inside the intakes that messed up flow REAL bad. The Cobra was supposed to have 320 HP but I have heard of many that had as much as 20-30 less because of this. I think there is supposed to be a decal under the hood somewhere or maybe the door sill showing the recall has been performed. One other thing about the new cobra's is the drive shafts have a tendency to snap with slicks on them. I would check with the guy mentioned earlier that is running 11's to see what his experiences are.
Sorry I keep posting novels |
08-24-2001, 06:18 PM | #7 |
Registered Member
Join Date: Aug 2001
Location: Madison, MS
Posts: 52
|
I'll bet you are just used to it now...hmmmmm how much credit do I have left on card
|
08-24-2001, 10:14 PM | #8 |
Registered Member
Join Date: Aug 2001
Location: Newark, DE - The First State
Posts: 15
|
Thanks cvenom96. My car has been fixed from the performance recall.
I'm not a nitrous fan either. Hmmm...still thinking... |
08-26-2001, 02:10 PM | #9 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
Don't mess with an off the shelf chip like Superchips. Put that Cobra on a Dyno and get a chip burned for it after you do some mods. This way the chip is set up for your specific car and mods. It'll make a big difference. Get your Bassani exhaust, K&N filter, underdrive pullies, at least 4.10 gears but alot of guys recommend 4.30s, subframe connectors, and either drag radials or slicks. You could do all of that stuff yourself except for the gear install and the dyno/chip. After you get the mods on go to a place and get the Cobra run on the dyno and get a custom chip burned for it. I'd bet low 12s to high 11s for your car. If not mid 11s.
------------------ 1994 Red SVT Lightning #2019 |
08-26-2001, 02:34 PM | #10 |
Registered Member
Join Date: Aug 2001
Posts: 81
|
You know you have a really nice car. And so does everyone else. I would protect your baby and get yourself a nice car alarm. If not some random guy might get a a cobra with 2 grand in mods. My .02
------------------ 97 Mustang GT Convertible The standard Cheap mods but no pullies |
08-29-2001, 12:25 AM | #11 |
Registered Member
Join Date: Aug 2001
Location: Newark, DE - The First State
Posts: 15
|
Thank you everyone...
Think to put the Bassani X, Dynomax Ultraflo SS or Magnaflow, Steeda Pullies, 4.10 gears, K&N, and subframe connectors. Plus Chip... Then Slick tires... Done? Let's see... ------------------ 99 SVT COBRA #2085 of 4040 Electric Green 98 SVT Contour #2022 of 6535 Gone but not forgotten. Life is Beautiful but my Cobra is a Beauty... Still BONE STOCK |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
thinki saw '93 cobra but not sure.....plz confirm this for me(description) | yelowjaket | Blue Oval Lounge | 5 | 06-09-2003 05:49 PM |
Awesome,Fast Paced Night. 7 Mustangs and one 99 Z28 6spd. I Toast a 94 Cobra. | Mercury | Stang Stories | 7 | 10-30-2001 01:08 PM |
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford? | KillaZ350 | Blue Oval Lounge | 24 | 06-29-2001 05:24 PM |
Safety Recall for 1999 Cobra and 2000 Cobra R | JoeJ | Special Production | 0 | 04-13-2001 08:18 PM |
Salaeen, Shelby, Cobra please define these for me. | Taqus | Blue Oval Lounge | 3 | 01-17-2001 02:39 AM |