© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-31-2006, 11:42 PM | #1 |
Registered Member
Join Date: Jan 2006
Location: wi
Posts: 15
|
Seeking 4.10 Gear Installation Advice!!!
Hey Guys!!
I am in the process of installing Ford Racing 4.10 Gears in my 98' GT, I need to know the initial pinion depth?? Also, is there a break in period for these gears?? Any ideas would be much appreciated!! Thanks! |
04-01-2006, 08:04 AM | #2 |
Moderator
Join Date: Aug 2000
Location: Milan, OH
Posts: 2,699
|
Re: Seeking 4.10 Gear Installation Advice!!!
FRPP gears generally aren't marked with a pinion depth. Simply use the same shim that was underneath the pinion bearing of your old gears.
__________________
Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!" |
04-01-2006, 08:25 PM | #3 |
Registered Member
Join Date: Jan 2006
Location: wi
Posts: 15
|
Re: Seeking 4.10 Gear Installation Advice!!!
well we got the gears in and they are nice and very quiet we must of done them right now i need to correct the spedo i heard i need a 23 tooth spedo gear is that correct and is that the best way to fix it?
|
04-01-2006, 10:03 PM | #4 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Re: Seeking 4.10 Gear Installation Advice!!!
For a 98 with a T-45, yes, the speedo gear is the way to go.
This should help you to find the correct piece: http://www.performanceparts.ford.com...charts/142.pdf
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
04-03-2006, 11:43 AM | #5 |
Registered Member
Join Date: Jan 2006
Location: wi
Posts: 15
|
Re: Seeking 4.10 Gear Installation Advice!!!
i called the local ford dealer and they dont make a 23 tooth spedo gear they told me to go to dodge to get the gear. i also talked to a tranny shop and he said that each tooth is 2mph and iam off 14 mph so a 23 tooth wont be enough my car has a 21 tooth please help
|
04-03-2006, 09:24 PM | #6 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Re: Seeking 4.10 Gear Installation Advice!!!
Did you not look in the chart I attached?
What size tires are you running on the car?
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
04-03-2006, 09:44 PM | #7 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Re: Seeking 4.10 Gear Installation Advice!!!
Steeda sells a 23 tooth gear.
http://www.steeda.ca/catalogue_product_1238.asp Unfortunately, it will still be off with 4.10s.....
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
04-06-2006, 12:09 AM | #8 |
96GREENGT
Join Date: Mar 2005
Location: las vegas
Posts: 51
|
Re: Seeking 4.10 Gear Installation Advice!!!
hammer, i did the calculation per the link you attached. i've got a 8 tooth, 3.73 ratio, and whether i have 800 or 815 (don't know exact) tire revolutions formula says i need a 24 tooth gear. do they make such a thing. i've got 275/40-17's on 17x9" rims on a t-45 equipped 96 gt which had a 3.27 stock, not 3.08's like other GT's of that year (it's a GTS). speedo feels about 8-10 mph off. what do you suggest?
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction -'87 Black LX 5.0 BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs |
04-06-2006, 12:37 AM | #9 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Re: Seeking 4.10 Gear Installation Advice!!!
Two options:
1. Get the 23 tooth gear and get pretty close (That's what I used with my 98 and 3.73s) or 2. Call Dallas Mustang and ask if they make a speed-cal for your application: http://www.dallasmustang.com/page/pr...p?product=9910
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
04-06-2006, 04:19 PM | #10 |
Registered Member
Join Date: Feb 2002
Location: Maryville,TN
Posts: 415
|
Re: Seeking 4.10 Gear Installation Advice!!!
Like the HAMMER said. get the Steeda 23 tooth or I think you can get a speed cal. I have the 23 tooth and it's off, but I never look at the speedo anyway!!
__________________
98 GT / convertable -98 Saleen engine, Saleen appearance pkg. SHM cams,P&P NPI heads, and so much more! |
04-06-2006, 09:46 PM | #11 |
Registered Member
Join Date: Jan 2006
Location: wi
Posts: 15
|
Re: Seeking 4.10 Gear Installation Advice!!!
i bought the speedcal i will be puting it in fri i called a spedo company they told me that was my ony option for a 98 auto kind of sucks 200.00 for gears and 200.00 for speedcal thank god my buddie did the gears. also not that impressed with gear change dosent seem like that big of a difference could it be the auto trans or is the 98 just that week?
|
04-09-2006, 06:39 PM | #12 |
96GREENGT
Join Date: Mar 2005
Location: las vegas
Posts: 51
|
Re: Seeking 4.10 Gear Installation Advice!!!
cornnuts-- sorry to butt into your post., see my reply above. figured it was relevent to the topic. thanks for the tips HAMMER and SURFBEAST!
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction -'87 Black LX 5.0 BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vibration after gear installation | Yan88gt | Windsor Power | 10 | 05-24-2006 11:43 AM |
speedometer gear installation? | squid | Windsor Power | 2 | 12-12-2002 12:42 AM |
Speedo Gear Question | Harry | Windsor Power | 21 | 08-22-2002 03:28 PM |
"Launch" Seeking tips - advice. (long) | Lou Lyman | Classic Mustangs | 3 | 04-12-2001 08:33 AM |
4.10 gear | stng87 | Windsor Power | 1 | 02-05-2001 07:04 AM |