MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 05-28-2000, 03:24 PM   #1
RUARK
Registered Member
 
Join Date: May 2000
Location: fenton,mo
Posts: 9
Question gears ratio

I just bought a 97 GT. I was wondering what type of gear ratio(axle) it has and what would be a better ratio for it( if there is one.This is a daily driver.
RUARK is offline   Reply With Quote
Old 05-28-2000, 09:05 PM   #2
T-Bone
Registered Member
 
Join Date: Jan 2000
Location: Minot AFB, ND
Posts: 138
Post

Should be 2.73's stock. Crawl under the back of your car and check the differential cover. There is a small tag on it that will say something like "2L 73".
Most people here will say that 3.73's are the best gears for your application. They take some getting used to but I wouldn't trade em.

------------------
'96 GT
5-speed,K&N air filter,Roush Cold Air kit,80mm MAF,Mac Cat-Back,Mac Pro Chamber H-Pipe, FMS 3.73's, FMS 70mm TB, Steeda Tri-ax, March U/D pulleys

T-Bone's '96 GT
T-Bone is offline   Reply With Quote
Old 05-28-2000, 10:47 PM   #3
97snakedriver
Registered Member
 
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
Post

Ditto. Although 3.27s were an option, but it really doesn't matter. 3.73s are a better gear for the SOHC.

[This message has been edited by 97snakedriver (edited 05-28-2000).]
97snakedriver is offline   Reply With Quote
Old 05-28-2000, 11:14 PM   #4
RUARK
Registered Member
 
Join Date: May 2000
Location: fenton,mo
Posts: 9
Post

Quote:
Originally posted by RUARK:
I just bought a 97 GT. I was wondering what type of gear ratio(axle) it has and what would be a better ratio for it( if there is one.This is a daily driver.
well,it says 3L-27,SO I Guess Ill get some of these 3.73 gears.
RUARK is offline   Reply With Quote
Old 05-28-2000, 11:29 PM   #5
97snakedriver
Registered Member
 
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
Post

Good man! Those 3.73s will wake her up nicely.
97snakedriver is offline   Reply With Quote
Old 05-29-2000, 03:04 AM   #6
Jim W
Registered Member
 
Join Date: May 2000
Location: New York
Posts: 15
Post

If your car already has 3.27's then 3.73's will be hardly notcible. I just upgraded my 95 from 3.27's to 3.73's and if I didn't know the mechanic real well I would have been removing the differential cover to check to see if he changed them, seriously. That is not a significant jump in ratio, be prepared. Though I woouldn't recommend anything more than 3.73's for street driving anyway, my cars with aode runs at around 2600 rpms at 65 mph, just right IMO.

I would for now put the money elsewhere.

Jim

------------------
1995 GT AODE,B&M shift kit, Vortech S trim SQ,30# injectors, 80mm Pro-M MAF,Bassani X w/cats,Dynomax cat-back,JMS Chip,3.73's,Eibach Sportlines, Monroe Sensatrac's,Summit Racing tranny cooler, Accel Race wires, Autolite spark plugs, MSD coil.

Best Run (13.6 @ 102)

http://www.geocities.com/MotorCity/Street/8048/
Jim W is offline   Reply With Quote
Old 05-29-2000, 03:36 AM   #7
97snakedriver
Registered Member
 
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
Post

Blown 5.0s and 4.6s are very different cars.
97snakedriver is offline   Reply With Quote
Old 05-29-2000, 01:05 PM   #8
RUARK
Registered Member
 
Join Date: May 2000
Location: fenton,mo
Posts: 9
Post

thanks for the advise everyone,but will i need that 23 tooth speedo gear?

[]

RUARK is offline   Reply With Quote
Old 05-29-2000, 03:31 PM   #9
97snakedriver
Registered Member
 
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
Post

Yeah, or a compansator. You can get the gear for about $15. Just look through any number of Mustang magizines and there will be a few dozen people selling them.

Installion is a 5 minute job.
97snakedriver is offline   Reply With Quote
Old 05-29-2000, 05:59 PM   #10
Jim W
Registered Member
 
Join Date: May 2000
Location: New York
Posts: 15
Post

97snakediver:

Yeah I know, but still the 3.27 to 3.73 difference will be hard to feel regardless. I just wanted to let him know because I was expecting a neck snapping difference and it was definitly not.
Jim W is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gears Gears Gears!!!! COBRAon18s Modular Madness 20 05-13-2002 04:44 PM
how can you tell what size gears you have? Kamaro Killer Windsor Power 7 04-03-2002 02:55 PM
Whats the best way to tell if your running lean or rich? K.C. 5.0 Windsor Power 9 09-10-2001 03:04 PM
Gears, need help!!!! Edgar Negron Windsor Power 3 05-27-2001 03:10 PM
Gears Gears Gears Skyman Windsor Power 6 03-11-2001 11:39 PM


All times are GMT -5. The time now is 09:48 AM.


SEARCH