anyone have dyno results for the new c&l plenum on 96-98 gt?

slow98 · 09-14-2003, 12:12 AM

they have some tests on newer gts but none on the non pi headed ones...just wondering if anyone has any information on this or has one and dyno tested it....also they say to use a bbk 75 mm throttle body with it would this be the same for a 96-98?

Hammer · 09-15-2003, 08:59 PM

The heads... replace or modify the heads...
They are the cause of the 96-98 headaches....

96_4.6 · 09-15-2003, 10:08 PM

For those of us that will never do the head swap due to the lack of money I want one!!! I like that intake better straight up then the horse on my current one but the question is do us 96-98 really need a 75mm tb???? 70 maybe but i dont think it will make a difference cause our heads suck but if you were to get a INTAKE PLENUM from C&L on your 96-98 would you change TB and if so what size?? Bolt-ons are so fun to do I need some more so I want this!!!

96_4.6 · 09-21-2003, 08:50 PM

Screw it I'm gonna buy one regaurdless. I was looking for a e-mail address to C&L I was gonna ask if they had an dyno test on the 96-98 versions but they only have the 2001-2003, hmm I wonder why proberly not worth posting lol. I was gonna ask them I have there 80mm MAF and inlet tube thats a pretty good set-up with the new Intake Plenum I wonder if I could finally get a new 70mm TB (I like installing bolt-ons) without losing horsepower, any suggestions without saying change the heads, I'm only 20 cant right now when I'm older I'll have more money for that stuff but I'm still a kid heheh. They do say the reason you lose horsepower when installing a new Throttlebody is because of the upper Plenum's bad design thats why this new Plenum should work with a bigger throttlebody.. Wow I wrote alot sorry hope someone read all this and will give me some input, thanks!!!!

09-14-2003, 12:12 AM	#1
slow98 Registered Member Join Date: Apr 2001 Location: draper,va,us Posts: 206	anyone have dyno results for the new c&l plenum on 96-98 gt? they have some tests on newer gts but none on the non pi headed ones...just wondering if anyone has any information on this or has one and dyno tested it....also they say to use a bbk 75 mm throttle body with it would this be the same for a 96-98? __________________ 1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock

09-15-2003, 08:59 PM	#2
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	The heads... replace or modify the heads... They are the cause of the 96-98 headaches.... __________________ Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...."

09-15-2003, 10:08 PM	#3
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	For those of us that will never do the head swap due to the lack of money I want one!!! I like that intake better straight up then the horse on my current one but the question is do us 96-98 really need a 75mm tb???? 70 maybe but i dont think it will make a difference cause our heads suck but if you were to get a INTAKE PLENUM from C&L on your 96-98 would you change TB and if so what size?? Bolt-ons are so fun to do I need some more so I want this!!! __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

09-21-2003, 08:50 PM	#4
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Screw it I'm gonna buy one regaurdless. I was looking for a e-mail address to C&L I was gonna ask if they had an dyno test on the 96-98 versions but they only have the 2001-2003, hmm I wonder why proberly not worth posting lol. I was gonna ask them I have there 80mm MAF and inlet tube thats a pretty good set-up with the new Intake Plenum I wonder if I could finally get a new 70mm TB (I like installing bolt-ons) without losing horsepower, any suggestions without saying change the heads, I'm only 20 cant right now when I'm older I'll have more money for that stuff but I'm still a kid heheh. They do say the reason you lose horsepower when installing a new Throttlebody is because of the upper Plenum's bad design thats why this new Plenum should work with a bigger throttlebody.. Wow I wrote alot sorry hope someone read all this and will give me some input, thanks!!!! __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DYNO results today!!!!!	SaleenGTS	Windsor Power	15	11-01-2001 07:07 PM
my first (stock) dyno results... pretty cool !!	jetuomi	Windsor Power	11	10-25-2001 03:10 PM
RESULTS - Grand Prix GT vs. Celica GTS	302 LX Eric	Stang Stories	7	09-25-2001 06:46 PM
Could you help me define these dyno results?	SlowStang2	Windsor Power	1	07-16-2001 05:53 PM
Moroso results w/ stock 207K '87 GT	EZRIDN	Stang Stories	3	07-12-2001 03:58 PM