MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 11-16-2001, 07:24 PM   #1
Green99GT
Registered Member
 
Green99GT's Avatar
 
Join Date: Oct 2001
Location: PA, USA
Posts: 19
Question Cats or Not?

hey all i am going to be buying a Xpipe sometime soon here and wanted to know what your thoughts are on if i should go with the offroad or the Cat version.... i do plan on adding a supercharger soon also.... and i know that SC/Turbo 4bangers tend to preform better with out Cats is the 4.6 the same way?
also what are some of the pros/cons of either setup aside from inspection and a sniffer
__________________
1999 mustang GT
2.5 MAC Cat-back
K&N filter
Green99GT is offline   Reply With Quote
Old 11-16-2001, 11:19 PM   #2
Ares
Registered Member
 
Join Date: Oct 2000
Location: Saxonburg, PA, USA
Posts: 236
Default

Umm I see no reason to not run cats. The loss of any power with todays cats is so small.
__________________
Ed..
My Mustangs webpage
NMRA M/M 7222
2000 Mustang GT - 5 speed
Race weight w/o driver 3086lbs, 3250 w/ driver

Best 1/4mile run to date: 12.79@105.96, 60' 1.76sec.(10-27-02) Best MPH 106.03(10-27-02)4.10gears
Ares is offline   Reply With Quote
Old 11-17-2001, 12:27 AM   #3
46stang
Registered Member
 
Join Date: May 1999
Location: moorpark ca
Posts: 340
Default

the hp diff. is pretty minimal. if you want your car loud go no cats, if you want to keep the decibals down some get the cats. also you will need mil eliminators or a aftermarket chip so your check engine light doesn't come on if you don't have cats! with cats no problem. fyi. good luck.
Leon
__________________
03 sonic blue cobra coupe,

11.49@122mph bakerfield raceway!
11.67@120mph fontana

98 GT, stock for now.
46stang is offline   Reply With Quote
Old 11-17-2001, 01:55 AM   #4
Mercury
The Redneck James Bond
 
Mercury's Avatar
 
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
Default

I went with No-Cats for the simple reason of COST. Its like 150+ dollars less with no cats.

Tim C and I built our own MIL eliminators. The Flotech cost me 112$, with cats I think it was 259$. MIL eliminators usually run around 50-60 dollars. The parts to build one ran me 6$ at Radio Shack. I had to go to 4 stores though to get the 4 main parts neccassary.
__________________
64 1/2 "D" code Red Mustang Coupe.
Red Baron,

2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars.

Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.
Mercury is offline   Reply With Quote
Old 11-18-2001, 07:11 PM   #5
I hate Rice
Registered Member
 
I hate Rice's Avatar
 
Join Date: Aug 2001
Posts: 81
Default

Hey Mercury do you mind posting on how you built your own eliminators? Thanks
I hate Rice is offline   Reply With Quote
Old 11-19-2001, 08:07 AM   #6
Red Mustang Gt 46
13.3 @ 103
 
Red Mustang Gt 46's Avatar
 
Join Date: May 2001
Location: Maryland
Posts: 253
Default

Just an opinion:
With cats, retain your low end torque and gain mid range HP... Without cats, lose low end torque and gain upper range HP.
I went with cats...4.6's already lack in the low end torque department.
__________________
Equipment by:
Steeda
C&L
COMP CAMS
FRPP
MSD
Bassani
Magnaflow
MAC
Red Mustang Gt 46 is offline   Reply With Quote
Old 11-20-2001, 11:59 AM   #7
Mustang92
Drag Racer!
 
Mustang92's Avatar
 
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
Default

Quote:
Originally posted by Red Mustang Gt 46
Just an opinion:
With cats, retain your low end torque and gain mid range HP... Without cats, lose low end torque and gain upper range HP.
I went with cats...4.6's already lack in the low end torque department.
Umm not exactly. With an Offroad H I picked up low end torque and power throughout the power band. An Offroad X will lose a little low end torque and will gain 1-2 more RWHP than an H.

Bill
__________________
2000 GT
VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune.
285 RWHP/296 RWTQ
11.97 @ 113.20
M/M 100, 7085

www.uprproducts.com
www.ponyexpressperformance.com
www.modulardepot.com
Mustang92 is offline   Reply With Quote
Old 11-20-2001, 09:05 PM   #8
Red Mustang Gt 46
13.3 @ 103
 
Red Mustang Gt 46's Avatar
 
Join Date: May 2001
Location: Maryland
Posts: 253
Default

Quote:
Originally posted by Mustang92


Umm not exactly. With an Offroad H I picked up low end torque and power throughout the power band. An Offroad X will lose a little low end torque and will gain 1-2 more RWHP than an H.

Bill
Umm, I thought he said an X-pipe specifically...

Would'nt you say an X-pipe paired with a 9:1-9:4 compression ratio will fair better with some back pressure. On the other side, a 10:1-11:1 compression ratio fairs better with no back pressure...in reference to low end torque...

Cliff
__________________
Equipment by:
Steeda
C&L
COMP CAMS
FRPP
MSD
Bassani
Magnaflow
MAC
Red Mustang Gt 46 is offline   Reply With Quote
Old 11-21-2001, 02:07 AM   #9
Green99GT
Registered Member
 
Green99GT's Avatar
 
Join Date: Oct 2001
Location: PA, USA
Posts: 19
Default

hey thanks for the input guys! i think i am gonna go with a Xpipe with cats.
__________________
1999 mustang GT
2.5 MAC Cat-back
K&N filter
Green99GT is offline   Reply With Quote
Old 11-21-2001, 12:21 PM   #10
Mustang92
Drag Racer!
 
Mustang92's Avatar
 
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
Default

Quote:
Originally posted by Red Mustang Gt 46

Umm, I thought he said an X-pipe specifically...

Would'nt you say an X-pipe paired with a 9:1-9:4 compression ratio will fair better with some back pressure. On the other side, a 10:1-11:1 compression ratio fairs better with no back pressure...in reference to low end torque...

Cliff
I didn't catch that part sorry about that.

Honestly I don't have enough experience personally with the X pipe because I don't care for the sound. However when I change over to Longtubes I'm going with an offroad X and bullet mufflers and from what I've seen on the dyno there will not be a loss in power due to a lack in back pressure.

Bill
Mustang92 is offline   Reply With Quote
Old 11-22-2001, 11:18 AM   #11
96SNAKE
Registered Member
 
96SNAKE's Avatar
 
Join Date: Jan 1999
Location: allentown,pa,u.s.
Posts: 780
Default

I'll chime in here. I've had both since my Bassani X with cats failed. I liked the Bassani with cats but the cats are junk and eventually fail as many Bassani owners have found out. If you want cats, go with VRS. I think they are not only cheaper but better made.

On the power issue.. I've heard from anyone who has gutted or replaced their cats, that torque goes up, despite the butt-o-meter feel of loss. I think the reason why it feels like we lose torque is because power increases nicely on top to make it seem like we lose some down low. I know the back pressure idea makes sense though. Once I get my car's O2 sensors replaced, I'll kknow for sure on my car.
__________________
formerly 96cobra89lx306

(96Cobra/softtop- Black&Tan, 3.73,almdrvsht,fancontrl,steeda sbfrmes,r-LCA's&shifter,eibachspgs,KYB's,FR-upper arms,Y2K Cobra R's,pulleys,Bassani X pipe(cats gutted),C&L 80mm,Stage 2 Clutch, polished intake and cam covers etc.. last dyno w/cats on-287rwhp.

93 Ford Probe Gt 4.39 stock gears and K&N (slower but turns)

2001 Green Ninja ZX6R
96SNAKE is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
May need new cats, excuse for x-pipe? richd Windsor Power 1 05-22-2003 12:07 PM
Cats or no Cats GerryGT Modular Madness 7 03-15-2003 11:17 PM
Mac H pipe w cats vs BBK x pipe with cats?? Chevyguy Windsor Power 15 11-16-2001 08:34 AM
Plugged cats? ummduh Windsor Power 2 01-22-2001 11:03 PM
Gutting cats, good or bad??? KillaZ350 Blue Oval Lounge 8 01-16-2001 09:22 PM


All times are GMT -5. The time now is 06:49 PM.


SEARCH