FINALLY! (Must read for early modular owners...)

Hammer · 02-13-2002, 07:31 PM

Finally!

A made to order and affordable intake\cylinder head swap kit for 96-98 GTs...

Check it out:
http://www.mustangworks.com/autonews...3625788,44734,

95mustanggt · 02-14-2002, 10:10 AM

I was waiting for you to say something about this. How does this stuff compare to the SVO parts?

SMOKE · 02-14-2002, 07:18 PM

Now that is what I'm talking about.

Finally.

Sweet and affordable for the early SN95ers.

Compared to SVO, probably not as good meaning quality is OEM but flow capabilities below SVO's stuff. But you can't beat it for the price.

Awesome.

SLOW 97 · 02-15-2002, 10:28 AM

If you guys like that then you'll love this. Sean Hyland Motorsport has this package plus two others w/ Bullitt intake and HI-PO cams. These are a great price. The #3 Package should add 100+ RWHP for $3999 N/A!!! Even more power if you have blower already. This will help us early 96-98 modular guys keep up with the New Edge GT guys. You can find these here at www.seanhylandmotorsport.com.

StoplightWarrior · 02-15-2002, 03:42 PM

Finally! Bout time!

Can't wait till the mod motors have as much head/intake performance parts variety as the 5.0's do.

SD Wheeler · 02-18-2002, 05:41 PM

Hammer,
Thanks for the post. Glad someone noticed!

95 GT/Smoke,
The package is comparable to the SVO parts. With the stock valves the flow is a bit less than the SVO heads if they have been fully ported. The velocity in these heads is the key difference. I have been able to improve flow dramatically while maintaining flow velocity through the runners. My custom 3 angle valve job is another plus. I have over 100 hours experimenting with different angles to find the best combination. With the simple addition of the ModMax oversize stainless steel valves (which I keep in stock here at DTA) I can put the PI heads right there with the best SVO heads.

Slow97,
Once again, SHM is behind the curve. His kit contains the '99/00 heads and is not ported. My kit contains the '01/02 heads and comes fully ported. Also, by using the newer heads you avoid having to switch valve covers and using different front cover bolts. This saves money for the buyer. I have several options available so you can tailor the heads to your application and available finances. The ModMax valvespring kit is available by adding $250 to the kit price. ModMax oversize stainless steel valves are also an option at $400 (valves and machine work). I can also lower the compression for those of you with superchargers. You want cams? I have 5 different N/A grinds and 3 different blower grinds available right now for $250 per set. These are regrinds but don't require lash caps like the Crane regrinds. I will also have the complete line of ModMax cams once they are available.
Now.....intake packages. The SHM stuff is once again......unported and incomplete. I am also offering a complete Ported Bullitt Intake Package for all '96 & up cars. These two kits have every last part necessary to switch to the Bullitt intake. Kit A has the Ford alternator included and is priced at $1500; Kit B is offered without the Ford alternator and is $1300. The alternator and required harness is available from Performance Automotive. Keep in mind......the intake comes fully ported and ready to bolt on.

So you can see that I'm trying to help the modular community by offering package performance at affordable pricing. I will have the website up within a few weeks so you can browse around and check out the other performance goodies I'll have. Stroker kits, short blocks, Cobra head/intake packages to name a few. I'm even working on a 358" shortblock for those of you wanting a "bigger" Cobra engine. Let me know if I can help any of you. My email is: shannan.wheeler@ps.ge.com
Phone: 281-864-2940 days
832-556-0441 evenings after 7pm (central)

Thanks!

SLOW 97 · 02-20-2002, 10:23 AM

You've got me really interested in that 358 Cobra short block!!! It'would give the 4V what it really needs.... LOW END TORQUE!!!

SD Wheeler · 02-20-2002, 08:31 PM

It's not just the 358" shortblock that'll do it. The ModMax stroker kits will give you 302", 324" or the custom 358".

02-13-2002, 07:31 PM	#1
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	FINALLY! (Must read for early modular owners...) Finally! A made to order and affordable intake\cylinder head swap kit for 96-98 GTs... Check it out: http://www.mustangworks.com/autonews...3625788,44734, __________________ Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...."

02-14-2002, 10:10 AM	#2
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	I was waiting for you to say something about this. How does this stuff compare to the SVO parts? __________________ 1995 Mustang GT 20016 F150 Lariat Super Crew

02-15-2002, 10:28 AM	#4
SLOW 97 Registered Member Join Date: Feb 2002 Location: Arlington Heights,IL Posts: 231	If you guys like that then you'll love this. Sean Hyland Motorsport has this package plus two others w/ Bullitt intake and HI-PO cams. These are a great price. The #3 Package should add 100+ RWHP for $3999 N/A!!! Even more power if you have blower already. This will help us early 96-98 modular guys keep up with the New Edge GT guys. You can find these here at www.seanhylandmotorsport.com. __________________ '97 Laser Red GT Coupe Stock 2V (Pulled Silencer) 4R70W Automatic Ripped off a BLISTERING 15.37@90MPH With a 2.21 60ft Just Installed- K&N Air Filter Coming Soon...... -4.10's -Flowmaster A/T or Magnapack Cat-Back

02-15-2002, 03:42 PM	#5
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	Finally! Bout time! Can't wait till the mod motors have as much head/intake performance parts variety as the 5.0's do. __________________ Black 2000 GT Auto V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc... 341rwhp, 338 torque 1994 Cobra #4343 Bolt on's only... Cofounder of Raccoon Racing

02-18-2002, 05:41 PM	#6
SD Wheeler "The Game" Join Date: Apr 1999 Location: Baytown, Texas USA Posts: 955	Hammer, Thanks for the post. Glad someone noticed! 95 GT/Smoke, The package is comparable to the SVO parts. With the stock valves the flow is a bit less than the SVO heads if they have been fully ported. The velocity in these heads is the key difference. I have been able to improve flow dramatically while maintaining flow velocity through the runners. My custom 3 angle valve job is another plus. I have over 100 hours experimenting with different angles to find the best combination. With the simple addition of the ModMax oversize stainless steel valves (which I keep in stock here at DTA) I can put the PI heads right there with the best SVO heads. Slow97, Once again, SHM is behind the curve. His kit contains the '99/00 heads and is not ported. My kit contains the '01/02 heads and comes fully ported. Also, by using the newer heads you avoid having to switch valve covers and using different front cover bolts. This saves money for the buyer. I have several options available so you can tailor the heads to your application and available finances. The ModMax valvespring kit is available by adding $250 to the kit price. ModMax oversize stainless steel valves are also an option at $400 (valves and machine work). I can also lower the compression for those of you with superchargers. You want cams? I have 5 different N/A grinds and 3 different blower grinds available right now for $250 per set. These are regrinds but don't require lash caps like the Crane regrinds. I will also have the complete line of ModMax cams once they are available. Now.....intake packages. The SHM stuff is once again......unported and incomplete. I am also offering a complete Ported Bullitt Intake Package for all '96 & up cars. These two kits have every last part necessary to switch to the Bullitt intake. Kit A has the Ford alternator included and is priced at $1500; Kit B is offered without the Ford alternator and is $1300. The alternator and required harness is available from Performance Automotive. Keep in mind......the intake comes fully ported and ready to bolt on. So you can see that I'm trying to help the modular community by offering package performance at affordable pricing. I will have the website up within a few weeks so you can browse around and check out the other performance goodies I'll have. Stroker kits, short blocks, Cobra head/intake packages to name a few. I'm even working on a 358" shortblock for those of you wanting a "bigger" Cobra engine. Let me know if I can help any of you. My email is: shannan.wheeler@ps.ge.com Phone: 281-864-2940 days 832-556-0441 evenings after 7pm (central) Thanks! __________________ SD Wheeler DTA Racing & Performance THE source for ModMax Components and Modular Power Packages FFW M/M #30-sponsored by Strictly Performance Moderator, Modular Motor & Big Block Forums Hardcore5.0

02-14-2002, 07:18 PM	#3
SMOKE Old School ROUSH Join Date: Nov 1999 Location: Stockbridge, GA Posts: 531	Now that is what I'm talking about. Finally. Sweet and affordable for the early SN95ers. Compared to SVO, probably not as good meaning quality is OEM but flow capabilities below SVO's stuff. But you can't beat it for the price. Awesome. __________________

02-20-2002, 10:23 AM	#7
SLOW 97 Registered Member Join Date: Feb 2002 Location: Arlington Heights,IL Posts: 231	You've got me really interested in that 358 Cobra short block!!! It'would give the 4V what it really needs.... LOW END TORQUE!!! __________________ '97 Laser Red GT Coupe Stock 2V (Pulled Silencer) 4R70W Automatic Ripped off a BLISTERING 15.37@90MPH With a 2.21 60ft Just Installed- K&N Air Filter Coming Soon...... -4.10's -Flowmaster A/T or Magnapack Cat-Back

02-20-2002, 08:31 PM	#8
SD Wheeler "The Game" Join Date: Apr 1999 Location: Baytown, Texas USA Posts: 955	It's not just the 358" shortblock that'll do it. The ModMax stroker kits will give you 302", 324" or the custom 358". __________________ SD Wheeler DTA Racing & Performance THE source for ModMax Components and Modular Power Packages FFW M/M #30-sponsored by Strictly Performance Moderator, Modular Motor & Big Block Forums Hardcore5.0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
96-98 GT owners (Must Read)...25rwhp for $100	91LX2Bfast	Modular Madness	12	02-05-2004 09:34 AM
Modular Madness Forum FAQ (Read This First!)	Hammer	Modular Madness	0	07-13-2002 01:18 AM
Cartech/Aeromotive fuel system owners please read!!!!	Black306	Windsor Power	4	06-18-2001 03:39 PM
94-95 gt owners please read	boricua_5litro	Windsor Power	6	05-08-2001 02:32 PM
69 owners, please read	Sean6990	Classic Mustangs	0	08-20-1999 11:47 PM