best posi for 8.8

jax702 · 09-19-2002, 06:14 AM

I'm putting 3.73's and some type of posi unit in my cobra next week. Lots to choose from....... any suggestions?
ty,
Jax

Tim Lester · 09-19-2002, 06:23 PM

I've got the EATON Posi. It is kind of the same as the TRAC-LOC but the EATON has better clutches, and it uses coil springs instead of the S type spring that he TRAC-LOC uses and the EATON is rebuildable just like the TRAC-LOC.

You might want to check out http://www.drivetraindirect.com/

Good Luck

tireburner163 · 09-19-2002, 08:20 PM

Eaton is good. You could also rebuild the stock Trak-Loc and add extra clutchs for more grip. You can get a rebuild kit for about $85 bucks.

Stay away from Alburn, once they are gone your can't rebuild them. You have to buy a new one.

jax702 · 09-19-2002, 08:59 PM

Quote:

Originally posted by Tim Lester
I've got the EATON Posi. It is kind of the same as the TRAC-LOC but the EATON has better clutches, and it uses coil springs instead of the S type spring that he TRAC-LOC uses and the EATON is rebuildable just like the TRAC-LOC.

You might want to check out http://www.drivetraindirect.com/

Good Luck

Thats where im goin next week to get this stuff put in...ty for the info

09-19-2002, 06:14 AM	#1
jax702 Registered Member Join Date: May 2002 Location: vegas Posts: 43	best posi for 8.8 I'm putting 3.73's and some type of posi unit in my cobra next week. Lots to choose from....... any suggestions? ty, Jax __________________ 1997 Cobra #3803 WMS cold air intake, 87 Pro M, Autologic chip, BBK twin 62 throttle body, BBK pulleys, Fluidyne radiator, trunk mounted battery....

09-19-2002, 06:23 PM	#2
Tim Lester Registered Member Join Date: May 2002 Location: IL Posts: 32	I've got the EATON Posi. It is kind of the same as the TRAC-LOC but the EATON has better clutches, and it uses coil springs instead of the S type spring that he TRAC-LOC uses and the EATON is rebuildable just like the TRAC-LOC. You might want to check out http://www.drivetraindirect.com/ Good Luck __________________ 1999 Mustang Cobra Solid Axle w/ 4.56's Magnaflow Cat-Back Dr.Gas O/R X-Pipe JBA 1-5/8ths Shorty Headers Homemade Powerpipe March Pulleys JMS Chip Steeda Tri-Ax Shifter Best E.T. w/ parts listed & BFG 275/40/17 D/Rs (10-26-'02; not including JMS Chip)- 12.95 @106.82, 1.79 60FT. Best MPH- 107.43 New Best MPH (4-26-03)- 109.45 316 RWHP/ 309 RWTQ

09-19-2002, 08:20 PM	#3
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Eaton is good. You could also rebuild the stock Trak-Loc and add extra clutchs for more grip. You can get a rebuild kit for about $85 bucks. Stay away from Alburn, once they are gone your can't rebuild them. You have to buy a new one. __________________ 1987 Buick T-type 1998 HD Electra Elide

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with posi rear	dogfighter	Windsor Power	6	10-02-2004 03:56 PM
Auburn posi ???'s...please help	dragstang86	Windsor Power	6	10-08-2002 05:52 PM
Getting Posi?????????? Help	98GtPower	Stang Stories	6	08-24-2002 01:59 PM
eaton posi/ baer claw problems	DirtKing	Windsor Power	3	04-28-2002 11:04 AM
New Auburn Posi, noise when turning	bark3rd	Modular Madness	7	11-07-2001 05:17 PM