mods=what time on 99 gt

Chevysucks · 03-13-2003, 10:12 PM

I am planning on buying this 99 gt, it has the following mods already done to it. I was just wandering what quarter mile times I could expect on bfg drag radials.

1) BBK Full Length Headers
2) Hi Flow BBK H-Pipe
3) Flowmaster American Thunder Cat-Back
4) March Underdrive Pullies
5) Ford 70mm Throttle Body
6) K&N Cold Air Intake Kit
7) 1" Intake Spacer
8) 180 Degree Thermostat
9) Hi Flow Water Pump
10) Motorsport Clutch
11) Custom Computer Chip

stangt00 · 03-13-2003, 10:15 PM

13.3-13.5 probably. Its all in the launch

Chevysucks · 03-14-2003, 12:16 PM

thats what I was figuring around.
thanks.

V8Mustang · 03-17-2003, 11:17 AM

Sounds like the car has some good mods already. Put some 4.10s in the car and, if you can hook up, you will drop a few more tenths.

Chevysucks · 03-18-2003, 12:44 PM

bad news guys: I called the guy this past saturday about going down and picking it up because he lives about an hour away from me and I was going to go get a loan that day, but he told me that he just sold it on friday. I was a day late! But he told me that he gets them allot and sells them because he goes to auctions. He told me to call him back later this week because he is going to have a yellow 2000 gt with 22,000 miles and a bbk cold air kit for 13,200 dollars.

he also said that he had a 98 gt with a full roll cage and and allot of mods done to it and sold it for 11,000/ and he had a 96 gt that he sold for 6,000. So this is a good guy to call.

03-13-2003, 10:12 PM	#1
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	mods=what time on 99 gt I am planning on buying this 99 gt, it has the following mods already done to it. I was just wandering what quarter mile times I could expect on bfg drag radials. 1) BBK Full Length Headers 2) Hi Flow BBK H-Pipe 3) Flowmaster American Thunder Cat-Back 4) March Underdrive Pullies 5) Ford 70mm Throttle Body 6) K&N Cold Air Intake Kit 7) 1" Intake Spacer 8) 180 Degree Thermostat 9) Hi Flow Water Pump 10) Motorsport Clutch 11) Custom Computer Chip __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

03-13-2003, 10:15 PM	#2
stangt00 Registered Member Join Date: Dec 2002 Location: Philadelphia PA Posts: 143	13.3-13.5 probably. Its all in the launch __________________ 2000 GT 80mm Pro-M mass air, 24lb injectors, 75mm BBK T/B, K&N Filter Cold Air, 1/2" Phenolic intake spacer, Underdrive Pulleys, Dyno Tuned Autologic Chip, FMS Shorty Headers, Mac Prochamber 2 1/2" Off Road H pipe, 2 Chamber Flowmasters, Steeda lowering springs. Steeda Tri-Ax Short Throw shifter, Steeda Power slot rotors w/ Hawk Pro pads, 3.73 FRP Gears. Headwork and Comp cams install in progress.

03-14-2003, 12:16 PM	#3
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	thats what I was figuring around. thanks. __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

03-17-2003, 11:17 AM	#4
V8Mustang Registered Member Join Date: Mar 2003 Location: NC Posts: 64	Sounds like the car has some good mods already. Put some 4.10s in the car and, if you can hook up, you will drop a few more tenths. __________________ www.CRmotorsports.com Ford Performance Parts

03-18-2003, 12:44 PM	#5
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	bad news guys: I called the guy this past saturday about going down and picking it up because he lives about an hour away from me and I was going to go get a loan that day, but he told me that he just sold it on friday. I was a day late! But he told me that he gets them allot and sells them because he goes to auctions. He told me to call him back later this week because he is going to have a yellow 2000 gt with 22,000 miles and a bbk cold air kit for 13,200 dollars. he also said that he had a 98 gt with a full roll cage and and allot of mods done to it and sold it for 11,000/ and he had a 96 gt that he sold for 6,000. So this is a good guy to call. __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raced a 99 GT 5-speed	StoplightWarrior	Stang Stories	4	05-15-2002 09:13 PM
First time at the track and loved it!	Silver2000GT	Racer's Club House	0	09-21-2001 12:10 PM
1st 1/4 time (01 GT convert)	St_Brawler	Modular Madness	2	05-29-2001 05:13 PM
what is 1/4 mi time for stock 2000 gt 5 spd?	bark3rd	Modular Madness	1	03-28-2001 05:18 PM
Just got an awesome race w/ a white '91 GT convertible (1-20-01, 11:30 pm)	Fox Body	Stang Stories	3	01-22-2001 09:00 AM