97 cobra intake

97svtcobra · 09-01-2002, 04:59 PM

what mods can i do to my stock intake runners on my 97 cobra i have a spair and i want to play with it?

Tim Lester · 09-04-2002, 07:27 PM

Heres some good info. http://www.shane.roberts.net/b_int.htm
Although his is a '99 it's basically the same motor, just more power.

Good Luck

97svtcobra · 09-04-2002, 10:21 PM

thanks for then great info. i blew apart the bottom end (rod through block)oops so i got a short block from SHM those guys rule and i bought a spare intake to maybe get a little more torqe. so i will give the boys at extrud a call thanks man

97 cobra
long tubes dr gas
4:10 fmco
flowmasters
mac cold air
eibach 2in drop springs tokico 5way adj struts/shocks southside upper and lower control arms
125 shot nos dry kit with purge
steeda timing adjuster,tri ax,clutch quadrent,fire wall adjuster
18 by 9 2000 cobra r's chrome with 255/45/18in front 275/35/18in back
track wheels consist of 16by10 draglites with 285/50/16bfg dragradials
best et on dragradials is a 11:43@119.24 60ft 1.89 launch at 4500rpm
and a chip tuned by diablo
326hp at 6200 320 ft lbs tq at 5600
485hp on the juce 476ft lbs tq

09-01-2002, 04:59 PM	#1
97svtcobra Registered Member Join Date: Sep 2002 Location: florida Posts: 6	97 cobra intake what mods can i do to my stock intake runners on my 97 cobra i have a spair and i want to play with it?

09-04-2002, 07:27 PM	#2
Tim Lester Registered Member Join Date: May 2002 Location: IL Posts: 32	Heres some good info. http://www.shane.roberts.net/b_int.htm Although his is a '99 it's basically the same motor, just more power. Good Luck __________________ 1999 Mustang Cobra Solid Axle w/ 4.56's Magnaflow Cat-Back Dr.Gas O/R X-Pipe JBA 1-5/8ths Shorty Headers Homemade Powerpipe March Pulleys JMS Chip Steeda Tri-Ax Shifter Best E.T. w/ parts listed & BFG 275/40/17 D/Rs (10-26-'02; not including JMS Chip)- 12.95 @106.82, 1.79 60FT. Best MPH- 107.43 New Best MPH (4-26-03)- 109.45 316 RWHP/ 309 RWTQ

09-04-2002, 10:21 PM	#3
97svtcobra Registered Member Join Date: Sep 2002 Location: florida Posts: 6	thanks for the info thanks for then great info. i blew apart the bottom end (rod through block)oops so i got a short block from SHM those guys rule and i bought a spare intake to maybe get a little more torqe. so i will give the boys at extrud a call thanks man 97 cobra long tubes dr gas 4:10 fmco flowmasters mac cold air eibach 2in drop springs tokico 5way adj struts/shocks southside upper and lower control arms 125 shot nos dry kit with purge steeda timing adjuster,tri ax,clutch quadrent,fire wall adjuster 18 by 9 2000 cobra r's chrome with 255/45/18in front 275/35/18in back track wheels consist of 16by10 draglites with 285/50/16bfg dragradials best et on dragradials is a 11:43@119.24 60ft 1.89 launch at 4500rpm and a chip tuned by diablo 326hp at 6200 320 ft lbs tq at 5600 485hp on the juce 476ft lbs tq Last edited by 97svtcobra; 09-04-2002 at 10:47 PM..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cobra tb to intake studs	scale	Windsor Power	1	04-18-2003 11:03 AM
cobra intake	scale	Windsor Power	1	04-07-2003 11:36 PM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
sn95 Cobra intake vs older sn93 Cobra intake	Fordman50	Windsor Power	2	03-17-2001 01:09 AM