Dan McClain opinion?? and anyone else to

[DemonGT]

hey dan or anyone else..have you seen on the corral that girl that just bought the stang for $23K with the 427 vortech supercharged engine that dynoed 850HP?? every one at the corral is riping her apart about it..whats your opinion on it dan or anyone else?????

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Mac long tubes,Cat-back,off road H,FMS 9mm wires,Competition gauges,C&L 76mm MAF

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,65mm tb
ICQ#35670781

[Dark Knight]

don't see why not... you never get the money out that you put inot a car..you can get a super gas car minus engine for under 10k..
'specially if it's a fox body car.. http://www.collectorcartraderonline....searchRealm=10
this car's going for $8500, throw a $10k engine in and you'd have money to spare..
So, yeah.. it's believable

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart

[Dark Knight]

this ones 10k http://www.collectorcartraderonline....searchRealm=10
l-)

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart

My opinion is this...

If she had the money to spend,and she wanted the car and could afford spending this amount of money on this particular car,than more power to her,it's her money and no-one has a right to tell her how to spend/or not spend money.

------------------

Paxton Blown 87GT
ICQ#91504337

[Dark Knight]

just another reason I dont go to the corral..send her over here..people would say congrats instead of busting on her ;-)

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart

[Harry]

I agree with Mustanguy. If she earns her own money, she can spend it on anything she wants.

I didn't check out the corral, but that sounds like a lot of car. Hopefully she has, or will obtain, the skill to drive it, and not get hurt in it.

Some people have the know how and time to build cars, others don't. I admit I wanted to do all the work on my mustang myself. But when it came time to rebuild the engine, I didn't have the time/tools/confidence for it, so I had it professionally done. Nothing wrong with paying to have things done right for you.

------------------
See my 1985 Mustang GT

[This message has been edited by Harry (edited 05-18-2001).]

[DemonGT]

they are riping on her cause things dont add up..like how the engine has yates heads with stock valve covers etc etc. stuff like that..now some dude says she is full of it cause he recognized the pic out of a 5.0 mag

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Mac long tubes,Cat-back,off road H,FMS 9mm wires,Competition gauges,C&L 76mm MAF

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,65mm tb
ICQ#35670781

[joe4speed]

I go to the corral too sometimes and notice that people are jumped on pretty quick regardless, but if they saw that pic out of 5.0 then it's probably well deserved! oh well!

[SmokeyDP]

I have read most of the first page, and from what I can see she didn't say anything to make her seem like she was lieing, up until the pic, if it is from a magazine. Who knows...maybe the mustang she bought was featured in the magazine? Everyone seemed to be jumping on her case based on how much she paid and what she got for it. They shouldn't have jumped down her throat unless she said something that was proof she was lieing if she even is.

------------------
1992 GT 5.0L Convertible
BBK Shorties, Flowmasters, Super Chip, Mass Air, Under Drive Pullies, Hurst Shifter, Duck Tape
AIM: SmokeyDP

[lx mike]

857 hp@8900 rpm
955 ft lbs@7300

does not work out

955 lb ft at 7300 would work out to 1237 hp at that rpm and 857 hp at 8900 woould work out to 505 lb ft at that rpm.

[This message has been edited by lx mike (edited 05-18-2001).]

[oldman]

I knew a guy while stationed in Ft. Belvoir Va who had a picture of his girlfreind in a frame on his desk. She was really a knockout. One day we took the picture out of the frame and it turned out to be a page out of Playboy. ya never know about some folks

[SmokeyDP]

HEY! I went a few weeks before anyone caught on to that!

------------------
1992 GT 5.0L Convertible
BBK Shorties, Flowmasters, Super Chip, Mass Air, Under Drive Pullies, Hurst Shifter, Duck Tape
AIM: SmokeyDP