Need Help with My AC Compressor and hi beams, not getting power...?

5.0 Pony · 07-20-2003, 10:44 AM

Hey, a while back i had my dash torn apart to replace the heater core, and i put it all back together. But now my AC compressor is not getting power, and my hi beams dont work. The little light comes up on the dash, but the headlights just turn off. And i tested my AC compressor and the wires just arent getting power to them. Could i have unplugged something inside the dash? Where would that be at? The fuses are all good i checked. Thanks.

bottlebaby91 · 07-21-2003, 12:43 AM

Under the steering wheel there is column there is a connector that is right under the key. Take the little cover off and wiggle it up and down while the car is running. See if that maks it work. If it does just put something on there to hold it where it works.

5.0 Pony · 07-21-2003, 02:07 AM

Ok thanks a lot, Ill try that today after work

. That could be it, since i had to drop the steering wheel to drop the dash. Hopefully thats it, tearin the dash apart=not fun.

5.0 Pony · 07-21-2003, 05:40 PM

That didnt work

. Looks like wire tracin time. Boooooo

07-20-2003, 10:44 AM	#1
5.0 Pony Registered Member Join Date: Jun 2002 Location: Nebraska Posts: 127	Need Help with My AC Compressor and hi beams, not getting power...? Hey, a while back i had my dash torn apart to replace the heater core, and i put it all back together. But now my AC compressor is not getting power, and my hi beams dont work. The little light comes up on the dash, but the headlights just turn off. And i tested my AC compressor and the wires just arent getting power to them. Could i have unplugged something inside the dash? Where would that be at? The fuses are all good i checked. Thanks. __________________ 1988 Mustang 5.0 LX Convertible -Mac Cold Air Intake -K&N Cone Filter -9mm FMS Spark Plug Wires -Hedmann Headers 2.5" O/R H-Pipe -Flowmaster 40 series 2.5" Catback

07-21-2003, 02:07 AM	#3
5.0 Pony Registered Member Join Date: Jun 2002 Location: Nebraska Posts: 127	Ok thanks a lot, Ill try that today after work . That could be it, since i had to drop the steering wheel to drop the dash. Hopefully thats it, tearin the dash apart=not fun. __________________ 1988 Mustang 5.0 LX Convertible -Mac Cold Air Intake -K&N Cone Filter -9mm FMS Spark Plug Wires -Hedmann Headers 2.5" O/R H-Pipe -Flowmaster 40 series 2.5" Catback

07-21-2003, 05:40 PM	#4
5.0 Pony Registered Member Join Date: Jun 2002 Location: Nebraska Posts: 127	That didnt work . Looks like wire tracin time. Boooooo __________________ 1988 Mustang 5.0 LX Convertible -Mac Cold Air Intake -K&N Cone Filter -9mm FMS Spark Plug Wires -Hedmann Headers 2.5" O/R H-Pipe -Flowmaster 40 series 2.5" Catback

07-21-2003, 12:43 AM	#2
bottlebaby91 Registered Member Join Date: Nov 2002 Posts: 141	Under the steering wheel there is column there is a connector that is right under the key. Take the little cover off and wiggle it up and down while the car is running. See if that maks it work. If it does just put something on there to hold it where it works.