Location of PCV valve (working on stang with dad now)

1hot5.0 · 10-06-2002, 08:28 PM

Im working on my stang right now with my dad trying to replace the pcv valve, and can not seem to find it. I looked in the chiltons manual, and it is by the right valve cover by the lower intake manifold? Any help would be great. Thanks!

fiveohpatrol · 10-06-2002, 09:28 PM

Its in the very center at the rear of the lower intake manifold. I have attached a very generic picture to try to point to it

drudis · 10-07-2002, 08:15 AM

Ditto.
Its the big open hole at the top of the rear portion of the intake:

fiveohpatrol · 10-07-2002, 08:29 AM

that picture helps ALOT more than mine, thanks drudis

Also, i forgot to add that I really reccomend replacing the PVC valve with a Ford piece from the dealership. The auto parts stores ones dont fit very well at all, and the Ford one's are snug like they should be. Go ahead and either clean or replace the screen that is under the PVC valve as well, you can remove it with a pair of needle nose pliars

hope this helps

1hot5.0 · 10-07-2002, 04:37 PM

Thanks a lot guys, ill be replacing it tonight.

10-06-2002, 08:28 PM	#1
1hot5.0 Registered Member Join Date: Mar 2002 Location: Arizona Posts: 172	Location of PCV valve (working on stang with dad now) Im working on my stang right now with my dad trying to replace the pcv valve, and can not seem to find it. I looked in the chiltons manual, and it is by the right valve cover by the lower intake manifold? Any help would be great. Thanks! __________________ 91 Mustang LX 5.0 Convertible AOD Mdifications: K&N filter, Mac Catback, BBK aluminum u/d pulleys.

10-07-2002, 08:15 AM	#3
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	Ditto. Its the big open hole at the top of the rear portion of the intake: __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

10-07-2002, 08:29 AM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	that picture helps ALOT more than mine, thanks drudis Also, i forgot to add that I really reccomend replacing the PVC valve with a Ford piece from the dealership. The auto parts stores ones dont fit very well at all, and the Ford one's are snug like they should be. Go ahead and either clean or replace the screen that is under the PVC valve as well, you can remove it with a pair of needle nose pliars hope this helps __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

10-07-2002, 04:37 PM	#5
1hot5.0 Registered Member Join Date: Mar 2002 Location: Arizona Posts: 172	Thanks a lot guys, ill be replacing it tonight. __________________ 91 Mustang LX 5.0 Convertible AOD Mdifications: K&N filter, Mac Catback, BBK aluminum u/d pulleys.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is a valve cover breather bad for the 4.6????	96_4.6	Modular Madness	6	08-21-2003 06:38 PM
Valve tap!!	SmokinStangGT	Windsor Power	1	07-31-2003 03:42 AM
Air bypass valve ?	Fostang	Windsor Power	4	08-01-2001 02:40 PM
One of those Days working on the 'Stang	jimberg	Blue Oval Lounge	5	04-02-2001 11:47 PM
'67 Disc Brake "Control Valve"	Pat Mullins	Classic Mustangs	0	04-24-1999 03:29 PM