Timing on mod moters

chichaw99 · 12-11-1999, 11:01 AM

If anyone has a timing adjuster, where have you found it most effective at. I just put it on and haven't had time to play with it. Also did anyone happen to dyno before and after, and if so was was it worth at such degrees.

------------------
black 99 GT,cobra hood & nose. offroads flows, 4.10s, fms pullies, pro 5.0, C&L 80mm, K&N, cold air, 13.77 @ 99.87 on cheaters.

97snakedriver · 12-12-1999, 07:46 PM

From what I've heard the timing adjuster doesn't do a whole lot of good unless your running a blower or N2O. But that's just what I've been told.

------------------
'97 Cobra, K&N, Flowmaster, subframes, 4.10 gears, Steeda Tri-Ax shifter, Steeda G-Trac 3, Cobra R wheels w/ Goodyear F1s

My Ride

cdloc · 12-13-1999, 09:12 PM

I read that it should be around 12 degrees.
Ive heard the same as Snakedriver would also like to know how it worked out.

12-11-1999, 11:01 AM	#1 (permalink)
chichaw99 Registered Member Join Date: Nov 1999 Location: College Station Tx USA Posts: 14	Timing on mod moters If anyone has a timing adjuster, where have you found it most effective at. I just put it on and haven't had time to play with it. Also did anyone happen to dyno before and after, and if so was was it worth at such degrees. ------------------ black 99 GT,cobra hood & nose. offroads flows, 4.10s, fms pullies, pro 5.0, C&L 80mm, K&N, cold air, 13.77 @ 99.87 on cheaters.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Total timing vs initial timing for max HP.	Dark_5.0	Windsor Power	32	04-21-2003 12:49 AM
Check engine light after steeda pullies / timing adjuster!! HELP!!	MineralGray02K	Modular Madness	1	09-29-2002 01:11 AM
points and timing specs	xfernal	Classic Mustangs	1	12-30-2001 03:20 PM
timing chain or timing gear	mustang66teen	Classic Mustangs	11	06-18-2001 08:44 PM
nos & timing controller	todd5litre	Windsor Power	5	01-09-2001 07:24 PM

12-12-1999, 07:46 PM	#2 (permalink)
97snakedriver Registered Member Join Date: May 1999 Location: Blacksburg, VA Posts: 1,526	From what I've heard the timing adjuster doesn't do a whole lot of good unless your running a blower or N2O. But that's just what I've been told. ------------------ '97 Cobra, K&N, Flowmaster, subframes, 4.10 gears, Steeda Tri-Ax shifter, Steeda G-Trac 3, Cobra R wheels w/ Goodyear F1s My Ride

12-13-1999, 09:12 PM	#3 (permalink)
cdloc Registered Member Join Date: Nov 1999 Posts: 9	I read that it should be around 12 degrees. Ive heard the same as Snakedriver would also like to know how it worked out.

Sponsored Links