Will 99+stang tail pipes fit 96-98??

96_4.6 · 09-17-2002, 01:16 PM

The tail pipes from mufflers back on the 96-98 gt's look so damn small compared to the 99+ gt's and i looked under the rear end and its the same size piping just with bigger tips welded on and i was wondering if you can put those on a 96 gt cause i hate the way it looks, so small

but the 96-98 gt's dont have those half circle cuts above the pipes so are we stuck with small tail-pipes???

stangman96 · 09-19-2002, 03:25 PM

just get you a cat back system, it is well worth it versus putting on some 99+ GT. spend like 300 bucks or less and you are set, mine was 259 bucks from bb&t racing.. mac cat back..

96_4.6 · 09-19-2002, 04:49 PM

i already have the flowmaster mufflers i just want the tips from 99+ for looks cause they look so small on my 96

Titan · 09-19-2002, 05:50 PM

I'm sure they'll fit, but if you want good looks, why don't u get side skirts w/ exhaust, or even saleen exhaust. Those big pipes on our cars will look...unusual. But, if you feel so compelled...

09-17-2002, 01:16 PM	#1
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Will 99+stang tail pipes fit 96-98?? The tail pipes from mufflers back on the 96-98 gt's look so damn small compared to the 99+ gt's and i looked under the rear end and its the same size piping just with bigger tips welded on and i was wondering if you can put those on a 96 gt cause i hate the way it looks, so small but the 96-98 gt's dont have those half circle cuts above the pipes so are we stuck with small tail-pipes??? __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

09-19-2002, 03:25 PM	#2
stangman96 Ford Dealer Mechanic Join Date: Feb 2002 Location: San Antonio Teaxs Posts: 31	just get you a cat back system, it is well worth it versus putting on some 99+ GT. spend like 300 bucks or less and you are set, mine was 259 bucks from bb&t racing.. mac cat back.. __________________ 96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...

09-19-2002, 04:49 PM	#3
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	i already have the flowmaster mufflers i just want the tips from 99+ for looks cause they look so small on my 96 __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

09-19-2002, 05:50 PM	#4
Titan Registered Member Join Date: Jul 2002 Location: Atlanta Posts: 296	I'm sure they'll fit, but if you want good looks, why don't u get side skirts w/ exhaust, or even saleen exhaust. Those big pipes on our cars will look...unusual. But, if you feel so compelled... __________________ Current Sophomore -- Mechanical Engineering Black on Black 98' GT 5-Speed Mods = Stuff

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How big are the stock tail pipes and how restrictive are they?	96_4.6	Modular Madness	4	12-09-2003 07:41 PM
Exhaust tail pipes	Michael Smith	Windsor Power	3	10-06-2003 07:30 PM
hlpe smoke form tail pipes	james87gt	Windsor Power	1	08-22-2003 02:22 AM
are mac's 3 1/2 inch tail pipes for my setup	Chevysucks	Windsor Power	1	03-18-2002 03:46 PM