won't idle sometimes

lewillie · 01-31-2000, 09:12 PM

My 99 4.6 some days just decides it won't idle. At first I thought it might be caused by the cold -10f. Today it was about 31f. and the same problem. I took it in to the dealer last week but the car would do no wrong. Any help or hints would be apreciated .

Tks. lewillie

------------------
99/ Silver GT 4.6 SOHC
M.S. headers 3.27

Hammer · 01-31-2000, 11:14 PM

Hmmm,
I think we'll need a bit more info here. When you say it won't idle, do you mean it dies? Idles too high or at various RPMs?

Have you made any mods to your induction?
(MAF, T-Body, Cold air kit)

Does it occur after the engine is warm, or just near start up?

------------------
98 GT
Dyno-Max cat-back exhaust, 3.73 gears, Steeda shifter, Ford Motorsport Underdrive pullies, 87mm MAF and Roush cold air kit...

KFU_Tavon · 02-01-2000, 02:20 PM

Check the IAC valve(idle air control). It is mounted to the intake behind the TB and looks similar to a miniature windsheild wiper motor. Remove it and clean it with carb cleaner or WD-40

------------------
Scott
96GT
MAC cat-back
BBK offroad h-pipe
MAC cold air induction
Steeda Tri-Ax Shifter

Everything in mod-eration

lewillie · 02-01-2000, 07:36 PM

Thanks guy's your insite is appreciated.
Hammer, this sucker DIES even when its warm.
I think something is very temperature
(it freezes) sensitive and I feel it's a component located far enough away from the engine to not be affected by engine heat.
Thanks again for the help. lewillie

------------------
99/ Silver GT 4.6 SOHC
M.S. headers 3.27

chichaw99 · 02-03-2000, 07:55 PM

My 99' was doing the same thing, ther was and air leak between the mass air and the throttle body, the crossover tube that runs from the driver side valve cover to the air intake tube had a lose connection. The problem was solved with small black zip ties and hasen't reoocured since, So chech for any lose fittings where air could get in between the T.B and the mass air. If you happen to have your speedo unhooked that would do the same thing as well.

------------------
black 99 GT,cobra hood & nose. offroads flows, 4.10s, fms pullies, pro 5.0, C&L 80mm, K&N, cold air, 13.77 @ 99.87 on cheaters.

lewillie · 02-03-2000, 08:51 PM

Thanks gents,
Will give it a try.
lewillie

------------------
99/ Silver GT 4.6 SOHC
M.S. headers 3.27

01-31-2000, 09:12 PM	#1
lewillie Registered Member Join Date: Oct 1999 Location: Ste, Catherine, quebec, Canada Posts: 23	won't idle sometimes My 99 4.6 some days just decides it won't idle. At first I thought it might be caused by the cold -10f. Today it was about 31f. and the same problem. I took it in to the dealer last week but the car would do no wrong. Any help or hints would be apreciated . Tks. lewillie ------------------ 99/ Silver GT 4.6 SOHC M.S. headers 3.27

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adjusting Length of high idle on Carb 5.0	twilightcall	Windsor Power	8	08-06-2003 08:31 AM
347 Big Time Idle problem	89FHPLX	Windsor Power	2	01-15-2002 12:02 PM
Problems with TFS engine combo..wont idle right and sputters when you give it throttl	dashapht	Windsor Power	8	07-17-2001 12:23 AM
I am over the idle deal	TomEboi	Modular Madness	3	03-24-2001 03:57 PM
2.3 idle	matt cook	Small Ponies	1	08-02-1999 04:22 PM

01-31-2000, 11:14 PM	#2
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	Hmmm, I think we'll need a bit more info here. When you say it won't idle, do you mean it dies? Idles too high or at various RPMs? Have you made any mods to your induction? (MAF, T-Body, Cold air kit) Does it occur after the engine is warm, or just near start up? ------------------ 98 GT Dyno-Max cat-back exhaust, 3.73 gears, Steeda shifter, Ford Motorsport Underdrive pullies, 87mm MAF and Roush cold air kit...

02-01-2000, 02:20 PM	#3
KFU_Tavon Registered Member Join Date: Aug 1999 Location: Ona, WV, USA Posts: 5	Check the IAC valve(idle air control). It is mounted to the intake behind the TB and looks similar to a miniature windsheild wiper motor. Remove it and clean it with carb cleaner or WD-40 ------------------ Scott 96GT MAC cat-back BBK offroad h-pipe MAC cold air induction Steeda Tri-Ax Shifter Everything in mod-eration

02-01-2000, 07:36 PM	#4
lewillie Registered Member Join Date: Oct 1999 Location: Ste, Catherine, quebec, Canada Posts: 23	Thanks guy's your insite is appreciated. Hammer, this sucker DIES even when its warm. I think something is very temperature (it freezes) sensitive and I feel it's a component located far enough away from the engine to not be affected by engine heat. Thanks again for the help. lewillie ------------------ 99/ Silver GT 4.6 SOHC M.S. headers 3.27

02-03-2000, 07:55 PM	#5
chichaw99 Registered Member Join Date: Nov 1999 Location: College Station Tx USA Posts: 14	My 99' was doing the same thing, ther was and air leak between the mass air and the throttle body, the crossover tube that runs from the driver side valve cover to the air intake tube had a lose connection. The problem was solved with small black zip ties and hasen't reoocured since, So chech for any lose fittings where air could get in between the T.B and the mass air. If you happen to have your speedo unhooked that would do the same thing as well. ------------------ black 99 GT,cobra hood & nose. offroads flows, 4.10s, fms pullies, pro 5.0, C&L 80mm, K&N, cold air, 13.77 @ 99.87 on cheaters.

02-03-2000, 08:51 PM	#6
lewillie Registered Member Join Date: Oct 1999 Location: Ste, Catherine, quebec, Canada Posts: 23	Thanks gents, Will give it a try. lewillie ------------------ 99/ Silver GT 4.6 SOHC M.S. headers 3.27