MustangWorks.com : Ford Forums - View Single Post

MJ86GT · 05-09-2003, 07:35 AM

Installed Ford Racing caster camber plates on my 86gt with sn95 spindles, cant get +3 degrees caster. It will only go to +1.8 with -.7 camber. We can get -1 camber but it drops the caster lower because of the strut opening being round. Steeda says that I wont be able to get anymore caster because of it being an 86 or earlier. Anybody have any ideas? Maximum Motorsports says to notch the top of the strut towers which is fine but seems like there should be enough adjustment with out doing this. Everything underneath is centered up and aligned.

05-09-2003, 07:35 AM	#1
MJ86GT Registered Member Join Date: Mar 2003 Posts: 32	86gt Alignment Installed Ford Racing caster camber plates on my 86gt with sn95 spindles, cant get +3 degrees caster. It will only go to +1.8 with -.7 camber. We can get -1 camber but it drops the caster lower because of the strut opening being round. Steeda says that I wont be able to get anymore caster because of it being an 86 or earlier. Anybody have any ideas? Maximum Motorsports says to notch the top of the strut towers which is fine but seems like there should be enough adjustment with out doing this. Everything underneath is centered up and aligned.