MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 05-06-2002, 11:38 PM   #1
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Talking I have a DATE....with a DYNO

Well it looks like I will have it on the dyno SAT!!!!!
Here is the shop I am geting it done at Cerra Racing
What do you guys think it will put down to the Ground lets see How good you are!!!!!! I dont have any times with the car So I realy Am not sure so it a Guess see How Close you are!!!!!!!!
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 05-07-2002, 12:02 AM   #2
JRowlette
Registered Member
 
Join Date: Apr 2001
Location: Bowling Green, KY
Posts: 95
Default

I'll take a stab at it:
295 hp
315 tq
I wish I could have afforded AFR's, but I am pretty happy with my TFS combo. I am sure you have heard it before, but a custom cam would really wake up your setup. How many rpm's are you going to run it up to?
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc.
286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune
Race weight : 3090 # w/ driver
New Best - 12.82@107.9 w/1.74 60'
JRowlette is offline   Reply With Quote
Old 05-07-2002, 07:53 AM   #3
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

Well if I am there I might as well Wind it all the Way out!!!
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 05-07-2002, 10:05 AM   #4
JRowlette
Registered Member
 
Join Date: Apr 2001
Location: Bowling Green, KY
Posts: 95
Default

How far? 6k?
I wish I could have wound mine out, but I didn't want to push the stock injectors. Besides, my hp curve really flattened out past 5k rpm. That's all gonna change after this weekend.
Good luck saturday, and make sure you share the numbers
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc.
286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune
Race weight : 3090 # w/ driver
New Best - 12.82@107.9 w/1.74 60'
JRowlette is offline   Reply With Quote
Old 05-07-2002, 10:15 AM   #5
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

well I will take it all the way to the TOP on my car that 6350 as I have a Mod Fuel Pump routing done On it I very very Much dont plan to see much Hp up there but that way I can tell HOW much more HP when I get a good cam.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 05-07-2002, 11:28 AM   #6
Grn92LX
Registered Member
 
Join Date: Mar 2002
Location: Long Island, NY
Posts: 55
Default

280rwhp and 315rwtq. I'd take it no higher than 5800-6000. Is your GT40 intake opening ported to allow for a 70mm TB? If not that may cause a slight restriction. I think the opening is 67mm. Are you gonna actually tune it or just make like 2 runs? Why the stock cam? At least you could do a before and after dyno for the cam. I wanna take my car to the dyno, but its too damn expensive cause the place charges through the roof! $100/2 pulls + $75 for a/f meter use + $25 for each extra pull + tax = over $200 What are they charging you? Are you gonna use a a/f meter to tune it? Good luck!
__________________
TFS heads/FTI custom cam/TFS street heat, Longtubes, 373's, MM lca's, Tokico springs/shocks
Grn92LX is offline   Reply With Quote
Old 05-07-2002, 12:37 PM   #7
whiterod
Registered Member
 
Join Date: Sep 2001
Location: zachary, la
Posts: 73
Default

i'd say right at 300 rwhp
__________________
GT-40X(58cc)heads, cobra upper&lower, FMS 65mm TB, 75mm Bullet, 24# injectors, 190 lph fuel pump, moroso cold air intake, BBK 1 5/8 equal length headers, flowmaster cat back, 1.7 cobra rockers, crane 2031, T5Z gear box, centerforce dual friction, mcleod bullet proof bellhousing, 3.55 gears, hurst billet shifter with over 193,000 miles. thanks to all who contributed
whiterod is offline   Reply With Quote
Old 05-07-2002, 01:08 PM   #8
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

I will be getting it Tuned Up on the Dyno I am going to stay with the stock Cam tell I rebiuld the short Block YES the Intake is Ported to a 70mm TB. I think that they are 100 for 3 pulls I think thats with the Air/Fuel as well I am not sure on that Tho...I think I will put a 65mmtb on it tho As the 70mmtb I have Has A vac Leak...
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Last edited by Stang Runner; 05-07-2002 at 02:32 PM..
Stang Runner is offline   Reply With Quote
Old 05-07-2002, 05:10 PM   #9
andy669
Registered Member
 
andy669's Avatar
 
Join Date: Jan 2001
Location: Moline Il
Posts: 901
Default

The normal price here is $100 for 3 pulls. That includes the wide-band O2. Tuning and wrenching are extra. I am good friends with Mike at Cerra Racing I will be swapping parts on Stang Runner's car so that will save him some money.

There is time still available for Saturday if anyone else is interested. Or if enough people are interested we could pick another day for a Mustang Works dyno day.

If anyone else thinks this is a good idea, PM me. If I get enough responses I will post an official poll in the BOL.

Stang Runner I have a Brand new Holley 70mm tb we can try on your car! I am borrowing it from a friend of mine who has my complete long block!

I also want you to bring your stock injectors if you still have them.

andy
__________________
88 coupe

91 LX NMRA Pure Street 5120
andy669 is offline   Reply With Quote
Old 05-07-2002, 05:20 PM   #10
lx mike
Undescribable
 
lx mike's Avatar
 
Join Date: Sep 1998
Location: Ft Myers Fla
Posts: 1,539
Default

I'll say 285-290 rwhp and around 310 rwt.
__________________
Rice Haters Club Member #101
lx mike is offline   Reply With Quote
Old 05-07-2002, 05:29 PM   #11
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

Yes I have the the 19's I will bring them!!!! too I hope to have a few new parts On the car by then as well Like a new better fuel reg I have a cheeper one now Adn I am not sure if it will be here tho in time but mine does work. I am getting a Fuel Presrure Gauge as well On my car I hope to have it on by then if it getts here in time.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 05-07-2002, 08:35 PM   #12
vande97
Registered Member
 
Join Date: Jan 2001
Location: okemos
Posts: 205
Default sweet

I hope you can pull 300rwhp that would be great!! Hey I was going to ask ya what color is you'r Dakota, 4x4???

later
vande
vande97 is offline   Reply With Quote
Old 05-12-2002, 09:43 AM   #13
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

well I was very Happy with the Guys at Cerra Racing they got 10 more HP and foot Lbs more to the wheel After the Dyno tune.
need to rember I have a stock cam well he is what she did.

271HP@5100-5400Rpms
311Lbs@4000-4500

I am Glad I got it Dyno there.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 05-12-2002, 12:00 PM   #14
andy669
Registered Member
 
andy669's Avatar
 
Join Date: Jan 2001
Location: Moline Il
Posts: 901
Default

Glad you made it home ok! You were probably home before I was and I only live ten minutes away.. hehehe.... I put about 10 miles on that AC Cobra on the dyno last night.

I wish we could have gotten a little more out of your car, but you werent too far off on the tuning.

Did you get any of the pictures extracted yet?

andy
__________________
88 coupe

91 LX NMRA Pure Street 5120
andy669 is offline   Reply With Quote
Old 05-12-2002, 01:39 PM   #15
Grn92LX
Registered Member
 
Join Date: Mar 2002
Location: Long Island, NY
Posts: 55
Thumbs up

Good #'s, right within the ballpark I predicted! How was your tune and what was the a/f ratio like? Can you post a graph?
__________________
TFS heads/FTI custom cam/TFS street heat, Longtubes, 373's, MM lca's, Tokico springs/shocks
Grn92LX is offline   Reply With Quote
Old 05-12-2002, 02:48 PM   #16
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

You can 271hp flat from 5100 to 5400rpm? Thats pretty odd. Also for your HP to be so low, and your peak tq to be so high.

Hmm I was expecting around 285 from your car after it was tuned.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 05-12-2002, 03:00 PM   #17
andy669
Registered Member
 
andy669's Avatar
 
Join Date: Jan 2001
Location: Moline Il
Posts: 901
Default

The 271 was the 3rd of three back to back to back pulls. Time restraints kept us from cooling the engine down and icing the intake.

Had we done that, we would have seen 285.

andy
__________________
88 coupe

91 LX NMRA Pure Street 5120
andy669 is offline   Reply With Quote
Old 05-12-2002, 03:10 PM   #18
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

Well here is a Few Pics of it they did not come upt to well it is a bit Dark to take good pics But you can see the Viper Motor good I Am wroking on the Vid and the Dyno sheet still.
T-Racing.com
Skyman yes it was very Flat I will get a Scan of the sheet on soon I hope today yet. it is with in 1-2 from those rangs I gave.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Darius' dyno numbers drudis Power Adders 7 08-27-2004 04:09 PM
Stingy Dyno? SleeperGT Modular Madness 4 10-22-2003 01:42 PM
My latest dyno adventures XR1stang Blue Oval Lounge 6 08-01-2003 04:00 PM
Dyno resource website 97mustangcobrad Racer's Club House 0 11-08-2001 11:38 AM


All times are GMT -5. The time now is 07:58 AM.


SEARCH