MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Corner Carvers Delight
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-01-2001, 09:00 AM   #1
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Smile GingerMan Report

Here are some photos and video I took at the GingerMan event. http://members.mustangworks.com/drud...gingerman2001/

My Mustang sat at home with a detroyed T5 from the Show&Go, and
didnt get the new TKO till it arrived at the loading dock literally at
11:30pm saturday night. No time to install...
So Scott Whitehead and I arrived together sunday night. Too bad the
State Trooper asked us to remain in the car... Would'a liked to have
gotten a photo of the flashing lights...
(ok, so he forgot to get his trailer re-registered)

Monday morning:
Started off VERY foggy in the morning.

Opened up tech and registration, and all went pretty smoothe.
I was surprised to hear that one car waiting to pass tech was
"changing springs"... What? Yes, literally changing VALVE springs
in the pit area. Got it all in and running. (I'm impressed).

We ran the first session with headlights (and foglights) on, as
the fog still hasnt lifted. The four cornerworkers were concerned,
but let us out anyways.

After a few HOURS, the fog lifted, and the day turned out beautiful. We
had a casualty with the Shelby Daytona losing a wheel (by breaking off
the hub) and sailing the tire out off the track into the horizon... Luckily,
only minor fender damage. We called for a flat bed tow truck, and
took an early lunch break at 11:00 while we got the car off the track (in
a little over an hour). He got it repaired by the end of the day.

Several cars were off track and needed to be towed in. Thanks Brad
for your AAA-towing services.

On the 3rd session, Scott's car was sputtering (again), followed by a
few backfires, followed by quiet... So he chewed thru yet another steel
distributor gear in 45 minutes of driving. Hmmmmm....

Larry was black-flagged for "something hanging and a little smoke".
He pulled into the hot pit lane. We looked, and it was only the stock
oil-level sender (must have come undone from the zip-tie, no biggie), and
a small leak from the rear of the intake. Next session, I hear over the
radio that they wanna black-flag him again. I get on the radio, and say that
its ok..... [10 seconds go by] and on the back straight, the motor
lets go. Looked like an airshow with a bi-plane doing a fly-bye with the
smoke trail... The cornerworkers get on the radio "...looks more
than a little oil leak now...". Larry was glad that at least it wasnt
the headgasket. He said you could feel that the connecting rod
was loose as you could grab it thru the hole in the side of the
oilpan.

There were several people I talked to that we correspond thru the
internet, and that was neat to put a face on an email address.

There was a BEAUTIFUL Shelby, full tubular chassis, IRS,
engine set back to about the radio...! WAY COOL!


By the end of the day, everyone had enough fun. The 2nd to last
session, there were only 4 cars out there. And we shut the whole
event down eary by not running the last session. Packed up, and went
home.
Great day. Got to ride in a couple of cars myself, and sure beat sitting
at work...



------------------
Darius Rudis
Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-)
My Mustang Page
drudis is offline   Reply With Quote
Old 08-02-2001, 08:23 PM   #2
jpinoh
Registered Member
 
Join Date: Aug 2001
Location: Ohio
Posts: 13
Post

What's the track like? Is it in good condition (smooth, few bumps, etc)?

I'm thinking of coming up there in Oct for the end of season session.

--jp



------------------
'99 GT
jpinoh is offline   Reply With Quote
Old 08-06-2001, 09:22 AM   #3
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Post

Its one of my favorite tracks. Very smoothe, 3-lanes wide, and nice straights to stretch your legs...

I'll be there October 27th.

------------------
Darius Rudis
Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-)
My Mustang Page
drudis is offline   Reply With Quote
Old 08-09-2001, 08:27 PM   #4
Skankin
Registered Member
 
Join Date: Dec 1998
Location: London, Ontario, Canada
Posts: 1,349
Post

Judging by the photo's, I take it you liked the GT350 ;-)
Skankin is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
GingerMan 07/28/2003 Opentrack Event drudis Corner Carvers Delight 0 07-09-2003 04:03 PM
I need a carfax report ASAP PLEASE! Kamaro Killer Blue Oval Lounge 6 11-12-2002 04:18 PM
SVT @ GingerMan Raceway (event report) drudis Corner Carvers Delight 1 05-31-2002 11:33 PM
Please help with Carfax Report. gt93mustang Windsor Power 1 04-02-2001 06:22 PM
GingerMan opentrack photos... drudis Corner Carvers Delight 0 08-01-2000 11:14 AM


All times are GMT -5. The time now is 07:38 AM.


SEARCH