

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Aug 2005
Posts: 10
|
![]() I'm looking to purchase a set of inexpensive upper and lower control arms for a 92 gt. Any thoughts or opinions on Granatelli or X2C would be very helpful. Thank you.
|
![]() |
![]() |
![]() |
#2 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
![]() I assume this is for drag racing, as you would not typically adding these components for opentracking. Thus I am not knowledgeable about these products.
__________________
Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Oct 2005
Location: Sabana Grande, Puerto Rico
Posts: 33
|
![]() Check the Summit set alternative, Granatelli's non adjustable are also a good choice.
__________________
ACRONYMS: LUK=Let Us Know, GL=Good Luck, LMK=Let Me Know, JIC=Just In Case, BTSTDTRT=Been There Seen That Done That Repaired That and the classic... DILLIGAS=Do I Look Like I Give A S*** 1986 Mustang GT w/T-Tops ![]() NOW: 5.0L Stock SB, X303 Cam, 700 cfm DP Holley, 289 '66 Heads, 1.7 RR, Richmond Gear 4+1 Tranny, Centerforce DF, 2.73 Gears WIP: 3.90 Gears, LS Overhaul, Adj. LCA's & UCA's (Granatelli), T-Top weather striping and rear braces bodywork ![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upper and Lower Rear Control Arms | RMARIANI | Windsor Power | 3 | 05-08-2004 02:29 PM |
Hotchkis upper and lower control arms | scale | Windsor Power | 0 | 09-24-2002 04:23 PM |
REAR UPPER AND LOWER CONTROL ARMS | bcinyuz | Windsor Power | 1 | 05-08-2001 04:17 AM |
What are the Best upper & lower control arms to get? | Violent84 | Windsor Power | 3 | 04-18-2001 01:37 AM |
Rear upper control arms | red82gt | Corner Carvers Delight | 2 | 08-01-2000 11:10 AM |