MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Corner Carvers Delight
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 12-20-2004, 01:29 AM   #1
Mach1Maniak
Registered Member
 
Join Date: Dec 2004
Location: Valencia, CA
Posts: 1
Default Newbie needs help

Hey guys, just wanted to get a round-a-bout suggestion on what most people are finding works for them. as of now, all i've done to the car is eibach sportline springs with the stock tokicos, and iam not impressed at all. the car never sees the strip nor the track, but i love (trying to) playing around on the street and in the canyons. what would be an economical step toward better handling. thanks in advance.

-Chris-
Mach1Maniak is offline   Reply With Quote
Old 12-22-2004, 08:53 AM   #2
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Default Re: Newbie needs help

Go back and do a "historical" search thru this forrum.

I always say "get a plan" and decide what you want to make out of your car. Is it a daily driver? weekend cruiser? weekend racer? track car?
All those will decide how much money/time you sink into your car.

for starters, springs/shocks is about all you need for a daily driver.
Then wheels/tires (put more rubber on the ground).
Beyond that, you are going to start sinking some serious change, if you wish to improve your ride.
__________________
Darius Rudis, Moderator
Corner Carvers Delight
1989 Mustang LX - Open Track Car
http://www.dariusrudis.com
drudis is offline   Reply With Quote
Old 12-22-2004, 08:01 PM   #3
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default Re: Newbie needs help

I always recommend welded subframe connectors as an early mod for any stang. They tighten up the handling and also reduce squeaks and rattles that can develop with time.
The only thing I would add to what Drudis said for a daily driver is a panhard bar if you want to go a step further. I had to build up my suspension in small steps for budgetary reasons and this was a great addition once I stiffened the chassis and did the basics. It helped immensely to cure the rear end wiggle and to make oversteer a little less snappy and more controllable (the quadrabind suspension curse).
If you plan on getting crazy then you need a well-defined plan or you can end up spending money on the same parts twice due to component compatibility issues with the more aggressive setups (torque arm/panhard, 5-link, etc.).
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 12-24-2004, 09:26 AM   #4
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Default Re: Newbie needs help

Yes, on the subframes. Thats should almost be done first.
Just decide on what kind, and what goal. I did the weld-on subframes, only to cut them off and redo them with thru-the-floor ones (pain in the @$$) later, as that was what I should have done in the first place.
__________________
Darius Rudis, Moderator
Corner Carvers Delight
1989 Mustang LX - Open Track Car
http://www.dariusrudis.com
drudis is offline   Reply With Quote
Old 02-07-2005, 08:45 AM   #5
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Newbie needs help

Darius - I was under the impression that you competitively raced your black LX. If so, what class are you able to run with the through-the-floor subframes?
procharge94 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie here 90GT Vert Blue Oval Lounge 24 11-25-2002 09:13 PM
Newbie w/ some questions. Falcons Talon Windsor Power 29 05-06-2002 09:05 AM
Total newbie question Temporary Blue Oval Lounge 8 08-04-2001 10:56 AM
newbie question wantingamustang Stang Stories 12 06-26-2001 06:46 PM


All times are GMT -5. The time now is 06:04 AM.


SEARCH