MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Corner Carvers Delight
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-13-2008, 10:32 PM   #1
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default No upper control arms????

I bought my 1992 LX about a year ago and it handles and drives great.

I was changing the rear brakes today and noticed the car doesnt have any upper control arms.

This car has a ton of suspension mods so I am not sure what the deal is. Maybe the torque arm negates the upper control arms????

Griggs Racing K member -Griggs Racing Control Arms -Griggs Racing Severe Duty Torque Arm -Griggs Racing Panhard Bar Severe Duty -Griggs Adjustable T/A Cover -Griggs Racing Bumpsteer Kit -Maximum Motorsports Lower Control Arms no spring perch -Maximum Motorsports Caster\Camber Plates -Maximum Motorsports Front Coil-Over Kit -Maximum Motorsports Rear Coil-Over Kit -Hypercoil 300 lb. Front Coil Over Springs -Hypercoil 250 lb. Rear Coil Over Springs
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 01-14-2008, 07:26 PM   #2
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Default Re: No upper control arms????

Thats-a-lotta-car!!!

Yes, the panhard does the side-to-side location, and the torque-arm does the rotational resistance. You dont need upper control arms.
__________________
Darius Rudis, Moderator
Corner Carvers Delight
1989 Mustang LX - Open Track Car
http://www.dariusrudis.com
drudis is offline   Reply With Quote
Old 01-16-2008, 11:51 AM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: No upper control arms????

Quote:
Originally Posted by drudis View Post
Thats-a-lotta-car!!!

Yes, the panhard does the side-to-side location, and the torque-arm does the rotational resistance. You dont need upper control arms.
Right now the car has a stock 5.0 HO with a small vortech blower on it. I am about to put in my H/C/I 331 stroker that will make substantially more power. Is the torque arm, panhard bar a sturdy set-up???

For example should I be worried about bolting on some slicks and doing a high RPM launch???
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 01-19-2008, 12:12 PM   #4
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Default Re: No upper control arms????

Depending on which T-arm you have. There is the HeavyDuty and the SuperDuty. You can tell them apart, as one looks about 2" wide and make from single tube. The SD looks 3" wide, made from 2x 1.5" tubes.
Its not really a drage race suspension, and if you ONLY plan on that, there might(?) be better systems. But for street/roadrace you got just about the best!

I believe Griggs once stated... something about 600hp...
__________________
Darius Rudis, Moderator
Corner Carvers Delight
1989 Mustang LX - Open Track Car
http://www.dariusrudis.com
drudis is offline   Reply With Quote
Old 01-20-2008, 12:16 AM   #5
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: No upper control arms????

Quote:
Originally Posted by drudis View Post
Depending on which T-arm you have. There is the HeavyDuty and the SuperDuty. You can tell them apart, as one looks about 2" wide and make from single tube. The SD looks 3" wide, made from 2x 1.5" tubes.
Its not really a drage race suspension, and if you ONLY plan on that, there might(?) be better systems. But for street/roadrace you got just about the best!

I believe Griggs once stated... something about 600hp...
I have come to realize than when you set-up a car to be a drag car it handles and rides like crap. This is going to be my pampered super fast daily driver.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
upper control arms Spyder1914 Small Ponies 2 12-19-2003 08:10 AM
Upper control arms Nixon1 Windsor Power 10 02-20-2003 09:05 PM
Upper/lower control arms. Sonics2042 Windsor Power 1 04-16-2002 12:01 AM
upper control arms dinomite Windsor Power 7 03-14-2001 07:37 PM
Rear upper control arms red82gt Corner Carvers Delight 2 08-01-2000 11:10 AM


All times are GMT -5. The time now is 12:29 PM.


SEARCH