Where do the spacers go on Pro3i C/C plates?
 

Anyone have any ideas where the spacers go if the car is lowered 1 1/2" (BBK's)? These are the Pro3i plates aka hotparts.com aka Maximum Motorsport. Thanks a bunch, Hector

I put mine "underneath" to give the strut as much travel as possible (before it bottoms out).
Just watch the hood. Put a piece of clay on it, and lower the hood gently to make sure you got the clearance. Mine was ok.
http://www.dariusrudis.com/mustang/stuff/ccplate.jpg