Camber Bolts with CC plates
I picked up a set of MM CC plates for my 99-v-6 and cant get more than 1.3 degrees neg camber. the shock is hitting the cutout on the shock tower-with thte plates set at max neg camber. since the cars has stock springs can I use camber bolts to get more negive camber? IF so where can I get them?
Im a bit concerned about lowering the car as Ive heard about a lot of bump steer problems and I dont have the garage to work on it myself to dial it in after spring install. I know it will handle better for auto-x lowerd and with stiffer springs, dunno if I wanna go that route.
steve
|