MustangWorks.com : Ford Forums - View Single Post

lito · 06-30-2003, 11:48 AM

Drudis

Would you please take a look at these photos and tell me what you think on how the tires are put onto the ground.

http://dettagli.no-ip.com/turagua060...2694ModRez.jpg

http://dettagli.no-ip.com/turagua0603/DSCN2697.JPG

http://dettagli.no-ip.com/turagua0603/DSCN2731.JPG

The car is in it's almost stock weight, a fewer pound here and there but just a few.

Front: It has relocated bushings on stock front A-arms, 950-1050lbs H&R springs, koni yellows, middle setting and stock anti sway bar (1 5/1" if I not wrong)

Rear: MM Alum panhard, MM Torque Arm 390-430 lbs springs, cobra rear sway bar, koni yellows.

I forgot, it has 1.8 camber and 3.5 caster, toe is in it's stocks toe out limits, w/steeda camber plates. I know it may need a little more camber on temp readings that we got on the pyrometer.

I'm thinking on findind a better sway bars front/rear, what do you think?

06-30-2003, 11:48 AM	#1
lito Registered Member Join Date: Feb 1999 Location: Caracas, Venezuela Posts: 81	Handling help Drudis Would you please take a look at these photos and tell me what you think on how the tires are put onto the ground. http://dettagli.no-ip.com/turagua060...2694ModRez.jpg http://dettagli.no-ip.com/turagua0603/DSCN2697.JPG http://dettagli.no-ip.com/turagua0603/DSCN2731.JPG The car is in it's almost stock weight, a fewer pound here and there but just a few. Front: It has relocated bushings on stock front A-arms, 950-1050lbs H&R springs, koni yellows, middle setting and stock anti sway bar (1 5/1" if I not wrong) Rear: MM Alum panhard, MM Torque Arm 390-430 lbs springs, cobra rear sway bar, koni yellows. I forgot, it has 1.8 camber and 3.5 caster, toe is in it's stocks toe out limits, w/steeda camber plates. I know it may need a little more camber on temp readings that we got on the pyrometer. I'm thinking on findind a better sway bars front/rear, what do you think? __________________ 92GT, SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, MAC 1"5/8 LT HEADERS, 3" XPIPE AND EXHAUST W/CUT OFFS, 4.10, H&R 950-1050 SPRINGS, BILSTEIN SHOCKS, MM PANHARD AND TA, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER www.killersracing.com www.clubcopa.com Last edited by lito; 06-30-2003 at 07:36 PM..