No Its Not a Ricer exshaust

Miss Mischief · 03-25-2003, 06:47 PM

Ok I have a 2000 V-6 5 speed Pony with a 6 pound blower she is going to be built out as a curve cutter Most of those mods are laid Out. However whats Up for Debate her is this, She has a single exshaust with the stock Headers Of Coarse I will Put on a set of ceramic Macs with heat resistent metalic material wrapped around them. Here is the Debate From those Dual I have been Talking to a Exshaust Tech here In Louisville he sugested that from the Header I use a 3" Diameter single exshaust all the way back inproving flow but alowing for restrition at the cat and the Turbo Muffler. Midus says the Guy has a screw loose I need From the mac's back 1 1/2" Dual exshaust with Dual Cats???? Help Please....

GodStang · 03-27-2003, 11:03 AM

I am running a MAC H-pipe with 2 chamber flowmasters on a 1994 Mustang. It is true duals from the headers back. It sounds decent and I gained power. Very please with it. I also think the duals just look better than one pipe coming out the back.

03-25-2003, 06:47 PM	#1
Miss Mischief Registered Member Join Date: Feb 2003 Location: Still Ugly as ever Posts: 111	No Its Not a Ricer exshaust Ok I have a 2000 V-6 5 speed Pony with a 6 pound blower she is going to be built out as a curve cutter Most of those mods are laid Out. However whats Up for Debate her is this, She has a single exshaust with the stock Headers Of Coarse I will Put on a set of ceramic Macs with heat resistent metalic material wrapped around them. Here is the Debate From those Dual I have been Talking to a Exshaust Tech here In Louisville he sugested that from the Header I use a 3" Diameter single exshaust all the way back inproving flow but alowing for restrition at the cat and the Turbo Muffler. Midus says the Guy has a screw loose I need From the mac's back 1 1/2" Dual exshaust with Dual Cats???? Help Please.... __________________ Miss Mischief RHC#153 Proud to carry the Card 2000 V-6 5 speed Frame Braces [Steeda] [Wanna be Cobra] 17" Rims with Kuhmo 245's 5 Spoke Gunmetal finish [Power Dyne] Blower Unpolished 6 psi {Mods to Come} [Steeda] Springs slightly lower then stock [Steeda] Anti sway bars front and rear. 1999 Jeep Cherokee Big six 5 speed Infinty Bose steroe Lots of Creatures Comforts [Mods] Brush/ Push bar Full length Welded and Bolted , Tow Hook Front and Rear 30" Goodyear AT's .

03-27-2003, 11:03 AM	#2
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	I am running a MAC H-pipe with 2 chamber flowmasters on a 1994 Mustang. It is true duals from the headers back. It sounds decent and I gained power. Very please with it. I also think the duals just look better than one pipe coming out the back. __________________ 2003 Sonic Blue Cobra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I need More Input On My exshaust Debate Please	Miss Mischief	Small Ponies	8	04-09-2003 06:29 AM
Another ricer in my rearview mirror	mongo	Stang Stories	14	11-15-2002 04:53 AM
How to mess up a RICER FLYBY !!!	FordFasteR	Stang Stories	11	09-18-2001 10:15 PM
Uneasy Ricer	lyonsd	Blue Oval Lounge	11	05-24-2001 12:33 PM
OK, Who killed my ricer story in the 98 Saleen thread;)	Hammer	Stang Stories	3	03-20-2001 10:46 AM