© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-27-2001, 02:20 PM | #1 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
Rotors on hats
Looking into the possiblity of replacing my M2300K Cobra 13" rotors with rotors on hats. Who has looked into this, and what are the results of your findings...?
------------------ Darius Rudis Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page |
06-28-2001, 09:06 AM | #2 |
Registered Member
Join Date: Jun 2001
Location: Allison Park, Pa, USA
Posts: 1
|
You may want to check out Wilwood 805-388-1188 as they have a new "big brake system" with 13" rotor (on hat) with a 6 piston caliper. These can be slotted, cross drilled and cad plated. I just started to research this myself and am interested in a front disc upgrade and a rear disc conversion for my 1988 Lx. I've started to look at Baer and Wilwood and so far Wilwood seem's to have a better product for the money. The Wilwood's are available for 4 or 5 lug's if that is an issue. Well, i guess it is not since you already have the M2300k Cobra setup. However, it is an issue for me because I already upgraded to a 4 lug 17" OZ Racing Competition wheel. I will continue to research in the near future. Good luck!
|
06-30-2001, 09:02 AM | #3 |
Registered Member
Join Date: Oct 1999
Location: New Mexico
Posts: 488
|
I am in the process of getting a new set of brakes, and have been looking at the Cobra conversion and the Baer's. What exactly is a rotor with a hat? I don't know much about brakes, and so I have been doing a lot fo research lately. Jumpsteady, whats the average price of the Willwood systems you have been looking at? Do they have a webpage by chance? Any help you guys could give me about some new brakes would be very helpful. I am trying to make an informed decision here so that I don't have to buy another set up because the one I bought couldn't handle the road courses. Thanks in advance for your help.
Chris |
07-02-2001, 02:35 PM | #4 |
Registered Member
Join Date: Apr 1999
Location: Overland Park, KS, USA
Posts: 1,631
|
I didn't think the Wildwood kit was available for a Mustang. At least I didn't see anything on their website. Don't those Baer Eradispeed kits come with hats? The don't look like quite as much of an improvement as a Wilwood 6 piston kit would be...but certainly cheaper.
------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s |
07-02-2001, 03:00 PM | #5 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
Ok, I was daydreaming about doing a cutom rotor on hat for the 13" Mustang brakes...
Assuming I had CHEAP access to rotors, would it be worthwhile to do a custom hat for the Mustang? If I were to get a 13" Coleman rotors like this: then order a Coleman custom hub: Could I end up with something that I saw on the Griggs Racing suspension website: ------------------ Darius Rudis Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page [This message has been edited by drudis (edited 07-02-2001).] |
07-04-2001, 12:20 AM | #6 |
Registered Member
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
|
You know, I've been thinking about the exact same thing. Brembo makes a couple of kits that use 2 part rotor, but they are mondo expensive and the rotors are a slightly different size...
Different companies make them for so many different brands I can't imagine there isn't somebody that makes them for Mustangs. BTW there is a Wilwood 6 pot kit available for Mustangs. There was a group purchase for them on the Corral not that long ago. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cross Drilled Rotors - Who uses them? | 2FastLX | Windsor Power | 6 | 09-29-2001 12:05 AM |
Brake Rotors | 93GTDIN | Windsor Power | 6 | 09-06-2001 08:55 AM |
Update on my scraping rotors | RMARIANI | Windsor Power | 0 | 09-05-2001 09:28 AM |
5 lug 11" dia rotors for fox body | MiracleMax | Windsor Power | 7 | 06-04-2001 11:34 PM |
Drilled front rotors | Danielz9 | Corner Carvers Delight | 3 | 06-14-2000 01:00 AM |