MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Corner Carvers Delight
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-01-2005, 10:59 PM   #1
Red85GT
Registered Member
 
Join Date: Jan 2005
Posts: 3
Default Suspension and Brake upgrades for '85 GT

I'm planning to upgrade my '85 GT. Want to run the 17 x 8 Bullitt or Cobra wheels. I've been looking at the Maximum Motorsports chassis and suspension parts. Their stuff seems to be pretty straight forward to install. Are there any other mfgs I should look at for suspension systems? For the brakes I'm not sure which way to go. The Ford M2300K set up looks like it might be the ticket or possibly the similar Baer system. This car will be street driven with an occasonal open track day. Whatever system I chose should perform, be durable, be able to be installed with a reasonable ammount of effort, and have good support for replacement parts.
Any input will be greatly appreciated.

Thanks
Red85GT is offline   Reply With Quote
Old 02-07-2005, 06:50 AM   #2
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Suspension and Brake upgrades for '85 GT

This will help you out greatly. http://corner-carvers.com/wiki/index.php?PlasticSpoon
procharge94 is offline   Reply With Quote
Old 02-08-2005, 03:21 PM   #3
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default Re: Suspension and Brake upgrades for '85 GT

I run all Maximum Motorsports suspension stuff on my car (torque arm, panhard, k-member, etc..) and can tell you that the difference is nothing short of amazing. Their parts are also very well designed and durable, which is important for a street driven car. My car is my daily driver and while it handles insanely, it's still not too harsh or unbearable on the street.
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 02-08-2005, 10:01 PM   #4
Red85GT
Registered Member
 
Join Date: Jan 2005
Posts: 3
Default Re: Suspension and Brake upgrades for '85 GT

Hey- thanks for the info. Most of the Ford folks around here are only interested in going in a straight line. I have a couple more questions. Does the torque arm make a lot of difference? It will probably be one of the last items to add. Also- anyone have any opinions on the Baer Brake system. I'm going to have to do something and the Baer stuff looks like it might be the way to go.
Red85GT is offline   Reply With Quote
Old 02-08-2005, 10:25 PM   #5
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Suspension and Brake upgrades for '85 GT

The torque arm, or something equivalent, is a must if you are trying to get that rear axle under control. I am going with an Evolution Motorsports Tri-link, http://www.evolutionmsport.com/evmCa...37114d2298bc96 . I have dealt with Evolution Motorsports on a few occasions, and they have been incredibly helpful and appear to produce quality parts. I am running their adjustable rear lowers and have no complaints.

As for Baer brakes, they are a good, reliable company. I feel they are over priced for what their kits consist of. You can easily put together the same kit on your own for much less. Just use ebay and look for what other people are selling due to upgrades.
procharge94 is offline   Reply With Quote
Old 02-10-2005, 02:58 PM   #6
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default Re: Suspension and Brake upgrades for '85 GT

The torque arm does make a huge difference. In fact, if you modify the suspension in steps like I did you will find that the rear has so much added traction with the torque arm that it will make the car want to understeer out of corners when you get on the accelerator. This is easily overcome with the right spring/damping and swaybar settings.

As for Baer brakes, I run the 13" Track Kit up front and the 12" Rear Touring Kit out back. I am very happy with their performance and reliability and with the right pads they don't overheat and fade even after some hard laps on DOT R-compounds (my car isn't that light, either with the '03 cobra motor, 6-speed, extra weight from HD torque arm, full interior, etc). I like Hawk HPS pads for the street and their more aggressive pads for the track.
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 02-11-2005, 10:12 PM   #7
Red85GT
Registered Member
 
Join Date: Jan 2005
Posts: 3
Default Re: Suspension and Brake upgrades for '85 GT

Ok- Sounds like the same setup I have been looking at. Did the Baer stuff go on easy? I want a well designed system that I don't have to scrounge a bunch of extra parts for.
Red85GT is offline   Reply With Quote
Old 02-14-2005, 10:07 PM   #8
drudis
Moderator
 
drudis's Avatar
 
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
Default Re: Suspension and Brake upgrades for '85 GT

I went with the Griggs front end, and I built my own t-arm/panhard rear suspension
(MANY photos on my homepage).

I recommend MM/Griggs for track, and Steeda 5-link for street.

Brakes with either PBR (M2300K) or Baer or $$$ Brembo calipers. Its up to you and your wallet...
__________________
Darius Rudis, Moderator
Corner Carvers Delight
1989 Mustang LX - Open Track Car
http://www.dariusrudis.com
drudis is offline   Reply With Quote
Old 08-19-2012, 07:44 PM   #9
4Isleeper
Registered Member
 
4Isleeper's Avatar
 
Join Date: Jul 2012
Location: Capitola, Ca
Posts: 4
Default Re: Suspension and Brake upgrades for '85 GT

I have '86 4 eye with full griggs suspension. I love this setup. I respect MM products. But, look at who wins the most? I live in santa cruz mountains and eros pull over then try to catch me... bye,bye
4Isleeper is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
90 gt 5 lug big brake swap ScottA40422 Windsor Power 2 01-05-2005 08:00 PM
Rear brake blocks before front break nielsmobers Classic Mustangs 3 10-06-2003 02:26 PM
2002 GT vs 1987 GT Review LONG Unit 5302 Blue Oval Lounge 11 06-09-2002 05:29 PM
Mustang suspension Skankin Corner Carvers Delight 1 08-17-2001 05:10 PM
Need Suspension Help! JohnnyG Corner Carvers Delight 3 01-15-2001 03:33 PM


All times are GMT -5. The time now is 04:23 PM.


SEARCH