A Factory Ride with A Pro Kit from Eibach

chrismc101 · 03-21-2006, 03:00 PM

I have a 86 Mustang GT with 16" Ponys. Never year I'm gonna do the 5 lug conversion and possibly add the suspension Pro Kit from Eibach.

Is it possible for me to keep the factory type feel in my ride? I actually like the performance of the springs, but don't want that bumpy ride in town. Is what I want to do even possible. And by the way, I'm not going for that "slammed" look, like some people like for their Stangs...

I thank whomever in advance...

drudis · 04-09-2006, 07:29 PM

Stock ratio on my 1989 was similar(?) to your rates, in that they were progressive 430#-550#.
My first set of springs was the EIbach, with a 450-580# rate (most every single company out there makes these). This, in my opinion, is how the factory should deliver these cars. Nicely lowered and nice sport rate springs.

If you want more, then I went with the 650# BBK linear rates. These were fairly stiff, and not all too recommended for a daily driver.
I wanted more track performance, and went with 425# coilovers (about 1600# rate for comparison). Now THESE are not a friendly street spring.

YOU need to decide from here on what you are going to get. IMOHO, 10% you'll barely notice firmness. 100% increase is entry level track springs at 900# and up.\

chrismc101 · 04-11-2006, 08:33 AM

Thanks for yor response. This helps out a lot. So the 450-580# rate are pretty much like factory ride?

03-21-2006, 03:00 PM	#1
chrismc101 Registered Member Join Date: Dec 2005 Posts: 35	A Factory Ride with A Pro Kit from Eibach I have a 86 Mustang GT with 16" Ponys. Never year I'm gonna do the 5 lug conversion and possibly add the suspension Pro Kit from Eibach. Is it possible for me to keep the factory type feel in my ride? I actually like the performance of the springs, but don't want that bumpy ride in town. Is what I want to do even possible. And by the way, I'm not going for that "slammed" look, like some people like for their Stangs... I thank whomever in advance...

04-09-2006, 07:29 PM	#2
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	Re: A Factory Ride with A Pro Kit from Eibach Stock ratio on my 1989 was similar(?) to your rates, in that they were progressive 430#-550#. My first set of springs was the EIbach, with a 450-580# rate (most every single company out there makes these). This, in my opinion, is how the factory should deliver these cars. Nicely lowered and nice sport rate springs. If you want more, then I went with the 650# BBK linear rates. These were fairly stiff, and not all too recommended for a daily driver. I wanted more track performance, and went with 425# coilovers (about 1600# rate for comparison). Now THESE are not a friendly street spring. YOU need to decide from here on what you are going to get. IMOHO, 10% you'll barely notice firmness. 100% increase is entry level track springs at 900# and up.\ __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

04-11-2006, 08:33 AM	#3
chrismc101 Registered Member Join Date: Dec 2005 Posts: 35	Re: A Factory Ride with A Pro Kit from Eibach Thanks for yor response. This helps out a lot. So the 450-580# rate are pretty much like factory ride?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Pro-Kit raises rear-end?????	High Plains	Modular Madness	3	06-03-2003 09:10 AM
Suspension ?--Bullitt, Eibach, Stock, or COMBO???	rel3rd	Windsor Power	3	10-15-2002 07:53 PM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
Ride quality with Eibach Drag kit is...	SlowStang2	Windsor Power	3	10-18-2001 03:56 PM
lowering rear, how will it ride?	Drew1971	Classic Mustangs	1	05-13-2000 02:03 AM