Tubular K members

lito · 10-26-2001, 10:02 AM

Which K members are still on the market?

Know about KB, Griggs and Granatelli (yikes!)

MM still on the making (hope so)

Thanks

blue00gt · 10-26-2001, 04:22 PM

HAL and D&D motorsports are about the only others that come to mind. If you are wanting it for handling/roadracing, I would go with Griggs or Kenny Brown (MM too if they ever release it) as they are a little stronger. The other brands are lighter and good for drag racing.

lito · 10-26-2001, 05:24 PM

Thanx blu,

I have a friend with a griggs unit, but wheel are moved too much to the front and to the outside (even this is good for the handling of the car, there's too much work to be done with the fenders)

I've mailed Chuck of MM asking him if he may give any hint about his.

I'll post here any news

------------------
92GT, SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, MAC 1"5/8 LT HEADERS, 3" XPIPE AND EXHAUST W/CUT OFFS, 4.10, H&R 950-1050 SPRINGS, BILSTEIN SHOCKS, MM PANHARD AND TA, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER

www.killersracing.com
www.clubcopa.com
<IMG SRC="http://www.killersracing.com/lito/mustan

94GTinLA · 10-27-2001, 04:01 AM

I have the full griggs setup and don't have any fender clearance problems. I have a 94 but I haven't heard of this being a problem in any griggs car. Even if it was the work would be worth the incredible difference in the cars handling and acceleration.

I race Solo II and am competitive against highly modified corvettes, RX7s, and the like. Beware that if you are a hard core solo II racer ANY K member swap will land you in C Prepared and will disqualify you for E Street Prepared AND Street Modified acording to National SCCA Solo Rules. You would have to check your regional rules if you don't race on a national level.

Have fun!

lito · 10-29-2001, 04:20 PM

The friend that installed the griggs setup had an 89LX, the fenders of this cars are different than 89-93 and yours have even more space. that might be the difference. He was also using some weird combination of spindle and discs so that would explain all the matter.

Chuck told me that his kmember is still in the making (finishing production fixtures), so I think I'll till his unit comes out.

------------------
92GT, SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, MAC 1"5/8 LT HEADERS, 3" XPIPE AND EXHAUST W/CUT OFFS, 4.10, H&R 950-1050 SPRINGS, BILSTEIN SHOCKS, MM PANHARD AND TA, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER

www.killersracing.com
www.clubcopa.com
<IMG SRC="http://www.killersracing.com/lito/mustan

10-26-2001, 10:02 AM	#1
lito Registered Member Join Date: Feb 1999 Location: Caracas, Venezuela Posts: 81	Tubular K members Which K members are still on the market? Know about KB, Griggs and Granatelli (yikes!) MM still on the making (hope so) Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for MCA members in Maryland	prostangs	Blue Oval Lounge	0	04-08-2004 02:56 PM
Roll Call: Old School MW members sound off!	Rebel79	Blue Oval Lounge	38	02-07-2002 10:52 AM
Thanks to Dan McClain, all the moderaters and productive members of the Mustang Works	Fox Body	Blue Oval Lounge	8	03-31-2001 11:26 PM
Tubular exhaust manifolds	2 birds	Small Ponies	0	06-17-2000 07:59 AM

10-26-2001, 04:22 PM	#2
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	HAL and D&D motorsports are about the only others that come to mind. If you are wanting it for handling/roadracing, I would go with Griggs or Kenny Brown (MM too if they ever release it) as they are a little stronger. The other brands are lighter and good for drag racing.

10-26-2001, 05:24 PM	#3
lito Registered Member Join Date: Feb 1999 Location: Caracas, Venezuela Posts: 81	Thanx blu, I have a friend with a griggs unit, but wheel are moved too much to the front and to the outside (even this is good for the handling of the car, there's too much work to be done with the fenders) I've mailed Chuck of MM asking him if he may give any hint about his. I'll post here any news ------------------ 92GT, SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, MAC 1"5/8 LT HEADERS, 3" XPIPE AND EXHAUST W/CUT OFFS, 4.10, H&R 950-1050 SPRINGS, BILSTEIN SHOCKS, MM PANHARD AND TA, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER www.killersracing.com www.clubcopa.com <IMG SRC="http://www.killersracing.com/lito/mustan

10-27-2001, 04:01 AM	#4
94GTinLA Registered Member Join Date: Mar 1999 Posts: 1	I have the full griggs setup and don't have any fender clearance problems. I have a 94 but I haven't heard of this being a problem in any griggs car. Even if it was the work would be worth the incredible difference in the cars handling and acceleration. I race Solo II and am competitive against highly modified corvettes, RX7s, and the like. Beware that if you are a hard core solo II racer ANY K member swap will land you in C Prepared and will disqualify you for E Street Prepared AND Street Modified acording to National SCCA Solo Rules. You would have to check your regional rules if you don't race on a national level. Have fun!

10-29-2001, 04:20 PM	#5
lito Registered Member Join Date: Feb 1999 Location: Caracas, Venezuela Posts: 81	The friend that installed the griggs setup had an 89LX, the fenders of this cars are different than 89-93 and yours have even more space. that might be the difference. He was also using some weird combination of spindle and discs so that would explain all the matter. Chuck told me that his kmember is still in the making (finishing production fixtures), so I think I'll till his unit comes out. ------------------ 92GT, SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, MAC 1"5/8 LT HEADERS, 3" XPIPE AND EXHAUST W/CUT OFFS, 4.10, H&R 950-1050 SPRINGS, BILSTEIN SHOCKS, MM PANHARD AND TA, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER www.killersracing.com www.clubcopa.com <IMG SRC="http://www.killersracing.com/lito/mustan