MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Corner Carvers Delight
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 05-25-2005, 11:36 AM   #1
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default IRS into a '94 GT

Just thought I would drop in and mention that I swapped an IRS into my '94 GT this past weekend. The swap was MUCH easier than I anticipated. The only real issue thus far has been running down a soft line to complete my rear brake lines. Other than that, it was relatively simple. I have yet to drive the car due to some wonderful clutch engagement/disengagement issues, but hopefully tonight all of that will be fixed. What I am the most excited about is the ability to play with my rear toe-in and negative camber!

I purchased koni SA's with 10" 600'lb coilover springs for the rear, urethane control arm and subframe arm bushings, aluminum diff bushings, and a rear bump steer kit is in the immediate future. Can anybody think of anything else I am missing on the rear?

Matt
procharge94 is offline   Reply With Quote
Old 05-25-2005, 01:48 PM   #2
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default Re: IRS into a '94 GT

I'm a big fan of Maximum Motorsports. Looks like they make some new parts for the IRS:
http://www.maximummotorsports.com/irs-asp.asp
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 05-25-2005, 10:37 PM   #3
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: IRS into a '94 GT

Quote:
Originally Posted by blue00gt
I'm a big fan of Maximum Motorsports. Looks like they make some new parts for the IRS:
http://www.maximummotorsports.com/irs-asp.asp

My car is equipped with all sorts of maximum parts. That is actually where I ordered the bushings from.

Matt
procharge94 is offline   Reply With Quote
Old 05-25-2005, 11:30 PM   #4
fastmax
Registered Member
 
Join Date: May 2005
Posts: 5
Thumbs up Re: IRS into a '94 GT

Yes MM does make suspension parts for the IRS. The IRS is good for cornering. I am also a big fan of MM parts.


Matt
fastmax is offline   Reply With Quote
Old 09-03-2006, 02:17 PM   #5
Duncan
Registered Member
 
Join Date: Sep 2006
Posts: 1
Default Re: IRS into a '94 GT

what car did you get the irs out of
Duncan is offline   Reply With Quote
Old 06-17-2007, 01:36 PM   #6
Vortec99GT
Registered Member
 
Join Date: Jun 2007
Posts: 3
Default Re: IRS into a '94 GT

Quote:
Originally Posted by procharge94 View Post
I purchased koni SA's with 10" 600'lb coilover springs for the rear, urethane control arm and subframe arm bushings, aluminum diff bushings, and a rear bump steer kit is in the immediate future. Can anybody think of anything else I am missing on the rear?

Matt
Just out of curiousity, what model are the SA's that you got? Sports, 30 series, etc......? Also what was in the decision to get 600lb springs in the rear? I have the Griggs kit all the way around on my car (which i dislike btw) but it has 475lb springs in the rear its way to soft. Many people have been telling me that 475 was way to stiff..... as i was contemplating doing a 550 in the rear and a 500 in the front. Your thoughts?
__________________
1999 Mustang GT SMC # 37

Best ET: 13.83 @ 101mph NA
Best 60': 1.875 (on street tires)NA
Dyno: 265RWHP / 302RWTQ NA

Best ET: 12.801 @ 111.69mph 10psi
Best 60': 1.981 (on street tires) 10psi
Dyno: 387RWHP/366RWTQ 10psi
Vortec99GT is offline   Reply With Quote
Old 01-10-2008, 11:37 PM   #7
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: IRS into a '94 GT

Quote:
Originally Posted by Duncan View Post
what car did you get the irs out of
It came out of an '03 Cobra. The guy was looking for a solid axle for the drag strip and I just happened to have one containing what he was looking for.

Quote:
Originally Posted by Vortec99GT View Post
Just out of curiousity, what model are the SA's that you got? Sports, 30 series, etc......? Also what was in the decision to get 600lb springs in the rear? I have the Griggs kit all the way around on my car (which i dislike btw) but it has 475lb springs in the rear its way to soft. Many people have been telling me that 475 was way to stiff..... as i was contemplating doing a 550 in the rear and a 500 in the front. Your thoughts?
If I remember correctly the SA's were 30 series, but I could be wrong. It was years ago and I purchased them used.

As for why I chose 600 lb springs for the rear? Mainly because it was available at a great price and I've heard of people running higher spring rates on the IRS. I matched this with 450 lb front coilover springs. I ran this setup at Sebring at about 50% effort (head gasket failure) and was surprised at how well the combination matched.


P.S. - Sorry for the incredibly delayed response. I had a slight leave of absence.
procharge94 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2002 GT vs 1987 GT Review LONG Unit 5302 Blue Oval Lounge 11 06-09-2002 05:29 PM
Raced a 99 GT 5-speed StoplightWarrior Stang Stories 4 05-15-2002 09:13 PM
1988 Gt - 1998 Gt Hp Each Year steedamustang01 Modular Madness 13 05-09-2002 07:26 PM
RESULTS - Grand Prix GT vs. Celica GTS 302 LX Eric Stang Stories 7 09-25-2001 06:46 PM
Just got my '89 GT! Time slip guesses? 84stangLX Blue Oval Lounge 6 07-25-2001 09:44 PM


All times are GMT -5. The time now is 07:05 AM.


SEARCH