Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-29-2001, 11:21 PM
|
#1 |
|
Registered Member
Join Date: Apr 1999
Location: Overland Park, KS, USA
Posts: 1,631
|
One last question about K-members
Ok...I'm in the market for a new front suspension (tubular K-member, A-arms, and probably a coil over kit) but I don't know where to go to get it. Everyone's told me that Griggs is pretty much the only name in town for street/road race use, but at around $2000 for the front I'm not sure I can afford it since I'll be doing the rear suspension at the same time as well as many other things. I've seen other setups from places like D&D, Granetelli, HAL, Ground Pounder (CCM), etc. but haven't heard much about them. I've already settled on a MM panhard bar/torque arm setup for the rear and I know they have a tubular K-member coming out...but I don't know when or how much it'll be. I'd just like to hear some thoughts from you guys.
------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s |
|
|
|
07-02-2001, 07:44 AM
|
#2 |
|
Registered Member
Join Date: May 2000
Location: middleboro,ma, usa
Posts: 734
|
i have a MM panhardbar and rlca kit for sale im selling it for $350.00 it has about 2000 miles on it. i have many other things for sale also... email me with inquiries.
bkrbkr19@juno.com |
|
|
|
|
07-02-2001, 03:17 PM
|
#3 |
|
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
I went with the Griggs k-member:
 Yeah, I just followed the crowd, BUT if everybody at the track recommends them, I am going to go with them. I never have seen the other k-members, but that kinda says something in itself. www.alanchavis.com has some nice writeups on his site about the MM stuff. ------------------ Darius Rudis Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page |
|
|
|
|
07-03-2001, 02:16 AM
|
#4 |
|
Registered Member
Join Date: Apr 1999
Location: Overland Park, KS, USA
Posts: 1,631
|
Hey Drudis...ca you tell me exactly what parts are in that picture and, if you can remember, how much it all cost you? I won't be doing the install so I'm not concerned with the ease of installation really...mainly right now I'm focusing on prices. I'm getting a good feel for who sucks and who doesn't but I just can't believe that Griggs is the only girl at the dance...especially when they're so much more expensive.
------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s |
|
|
|
|
07-03-2001, 09:41 AM
|
#5 |
|
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
There is the K-member, control arms, bumpsteer kit, and coilover hardware. I ogt a _screaming_ deal on these.
Try www.griggsracing.com for pricing. Actually, watch the classified and at opentracking.com . They sometimes have some used stuff pop up, and you can save a few bucks. ------------------ Darius Rudis Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Another tire question | 96Saleen | Modular Madness | 6 | 02-10-2004 05:27 PM |
| A stupid question I hate asking about exhaust sound | jwboner | Windsor Power | 4 | 08-05-2003 05:55 PM |
| simple question | Lonzo | Classic Mustangs | 3 | 09-10-2002 09:37 AM |
| Serious Question! Senior Members Please! | 95mustanggt | Windsor Power | 8 | 07-06-2002 03:40 PM |