![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Yay for Chickys
Join Date: Feb 2001
Posts: 1,532
|
![]() Ever since I really started throwing some cash at my car, my greatest dream was to make her handle as if she was on RAILS. She corners pretty well, but if I hit a bump, I'm all OVER the road
![]() Help! Signed, A wanna be road racer ![]() |
![]() |
![]() |
![]() |
#2 |
Mustang Addict
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
|
![]() Your alignment may have alot to do with it. My '00 GT is lowered well over 2" and I don't have a noticeable bump steer problem (I don't have a bump steer kit or offset bushings). I just have MM CC plates and got it aligned after installing the front suspension.
Also, if you have a stock style rear suspension setup (no torque arm & panhard bar or Steeda 5-link type) you may want to leave the quad shocks on for now.
__________________
Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s |
![]() |
![]() |
![]() |
#3 |
Mustang Addict
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
|
![]() Sorry Belle, I just read your other post and figured out that you removed the quads due to clearance issues with your wheels. Maybe time for a torque arm setup?
![]() Out of curiousity, does flipping the quads over get you enough extra clearance? I had 10.5 R's with 315s on mine for a while and they fit OK with the quads in their stock configuration, but not sure if the clearance is the same on earlier SN95s.
__________________
Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s |
![]() |
![]() |
![]() |
#4 |
Yay for Chickys
Join Date: Feb 2001
Posts: 1,532
|
![]() I tried flipping them but it still squawked in hard turning, so I just yanked them completely off
![]() ![]() Belle |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Apr 2002
Location: Atlanta, GA
Posts: 2,325
|
![]() This may be a dumb question, but have you considered throwing Koni's up there? They make an externally adjustable unit for that car, but I have no idea if they would clear better. I only run Koni's as replacements, unless I'm just dumping the car. Guess its the old guy in me.
Deuce
__________________
1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13 |
![]() |
![]() |
![]() |
#6 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
![]() It is the REAR (or front) of the car that is getting upset over bumps and potholes?
If its the rear, WHILE on a turn, then its the axle moving side-to-side. You'll need something like a panhard to control lateral movement, and keep it centered where it belongs.
__________________
Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com |
![]() |
![]() |
![]() |
#7 |
Yay for Chickys
Join Date: Feb 2001
Posts: 1,532
|
![]() Well actually...it feels like BOTH.
The front is pulled off the straight path, like braking with worn rotors, but it happens while accelerating or maintaining speed. However, I also feel the rear squawk sometimes as well going over uneven pavement, and when the rear tires finally grab, it lurches to one side or the other... |
![]() |
![]() |
![]() |
#8 |
Get down.....
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
|
![]() Belle. because such a low profile and wide tire, the tire will seem to ride the worn grooves in the pavement. your axle in the rear is moving side to side along with the front. to correct this, get a Panhard for the rear and if you have bumpsteer, get the bumpsteer kit from Maxium Motorsports, then put your C/C plates on and get it aligned.
did you check your front end for tightness? tie rod play, ball joint and even bad hub bearings with cause a wander or a side to side ride. ths intensifys with wider, low profile tires. check the front end tightness and go from there. your quad shocks have nothing to do with the problems you mentioned above. they are only there to prevent axle windup.
__________________
Cobra brakes are on! Finally..... ------------------------------------------------ |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bump stop on coil overs? | ciara | Windsor Power | 1 | 01-16-2004 11:08 AM |
For the people who have no way to bump timing is this a good buy??? | 96_4.6 | Modular Madness | 6 | 06-05-2003 01:31 PM |
Brake Steer | XTheOwl | Modular Madness | 6 | 05-12-2003 12:02 PM |
Strut Bump Stops? | Jeff Chambers | Windsor Power | 0 | 05-23-2002 09:23 AM |
How do you install a Bump Steer kit? | Timanator | Corner Carvers Delight | 5 | 07-15-2001 11:54 PM |