Suspension Techniques
My buddy just bought the suspension techniques 2" lowering springs. He was wondering how they ride and if anybody had any problems with them? Thanks.
------------------ 1985 Mustang GT Cobra Mostly stock. Flowmaster two chambers, Mac 2.5" tailpipes, MSD-6AL with Blaster coil, Weiand Stealth intake, Eibach springs, Monroe Formula GP's, 16" ROH wheels. |
IMOHO, the 2" drop is too much. Dont know about the rate, but probably in the 580# range. If he hasnt installed them yet, I wouldnt. The geometry is off by lowering it too much.
------------------ Darius Rudis Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page |
a friend of mine has them on his 98 gt it rides pretty stiff but now his alignment is off and it sits so low that his shocks and struts are bottomed out i wouldn't have them put on
------------------ GT-40P heads, Ported Cobra Intake, E-303 Cam, 24LB injectors, 75mm pro-m mass air, 65 mm throttle body, 3.73 gears, 3000 stall precision industries converter, transgo shift kit, ccm upper and lower control arms, bbk springs, mac exhaust all the way back, autometer water temp, trans temp, chrome ponys w/ 245-50-16 SZ-50's, kenny brown chassis stiffening kit, 190LPH FP, 3 core radiator, 1.6 frpp roller rockers, MSD 6al, MSD blaster TFI coil, powerslot rotors, koni shocks & struts |
Sorry guys its too late. It sits really nice, but he hasn't had a chance to drive it as it is winter now.
|
All times are GMT -5. The time now is 08:38 PM. |